How to set up a debian virtualbox with a static ip address07.12.13

1. on your debian virtual box install 2 utilities: # sudo apt-get install bridge-utils uml-utilities 2. halt the debian virtual box 3. In the Virtual Box Settings for your debian applicance Change ‘Attached to’ from NAT to Bridged Adapter, 07.12.13

http://www.karlrixon.co.uk/articles/linux/virtualbox-bridged-adapter-with-ubuntu-debian-host/

after the changes below you can change to a static ip address in /etc/network/interfaces/ # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet static address 192.168.1.90 gateway 192.168.1.1 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 07.12.13

http://www.debian-administration.org/articles/254

this works: # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface allow-hotplug eth0 #iface eth0 inet dhcp auto eth0 iface eth0 inet static address 192.168.1.7 gateway 192.168.1.1 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 07.12.13

bug in virtualbox or kernel

you have to use Intel Pro/1000 MT Destkop (82540EM) Network Card to work with Briged and static IP address 07.12.13

• Home
• Notebook
• Contact us

• Privacy Statement
• 

Copyleft ☠ 2024