User manual X395 Lenovo Thinkpad Lapotp30.03.25

T495s and X395
User Guide

Read this first
Before using this documentation and the product it supports, ensure that you read and understand the
following:
* Appendix A "Important safety information" on page 65
* Safety and Warranty Guide
* Setup Guide

Fourth Edition (April 2023)
(c) Copyright Lenovo 2020, 2023.
LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services
Administration "GSA" contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS35F-05925.

Contents
About this documentation . . . . . . . . iii
Chapter 1. Meet your computer . . . . . 1
Front . . . . . . . . . . . . .
Base . . . . . . . . . . . . .
Left . . . . . . . . . . . . .
Right . . . . . . . . . . . . .
Rear . . . . . . . . . . . . .
Bottom . . . . . . . . . . . .
Features and specifications . . . .
Statement on USB transfer rate .

.
.
.
.
.
.
.
.

. 1
. 2
. 4
. 6
. 7
. 8
. 9
10

Chapter 2. Get started with your
computer . . . . . . . . . . . . . . . . 11
Get started with Windows 10 . . . . .
Windows account . . . . . . . .
Windows user interface . . . . . .
Windows label . . . . . . . . .
Connect to networks . . . . . . . . .
Connect to the wired Ethernet . . .
Connect to Wi-Fi networks. . . . .
Connect to a cellular network. . . .
Lenovo Commercial Vantage . . . . .
Interact with your computer . . . . . .
Use privacy protection (for selected
models) . . . . . . . . . . . .
Use the keyboard shortcuts . . . .
Use the TrackPoint pointing device .
Use the trackpad . . . . . . . .
Use the multi-touch screen . . . .
Use multimedia . . . . . . . . . . .
Use audio . . . . . . . . . . .
Use the camera . . . . . . . . .
Connect to an external display . . .

.
.
.
.
.
.
.
.
.
.

11
11
12
13
13
13
13
14
14
15

.
.
.
.
.
.
.
.
.

15
17
19
20
22
24
24
24
25

Chapter 3. Explore your computer . . 27
Manage power . . . . . . . . .
Check the battery status . . .
Charge the computer . . . . .
Maximize the battery life . . .
Set power button behaviors . .
Set the power plan . . . . . .
Transfer data . . . . . . . . . .
Set up a Bluetooth connection .
Use a smart card . . . . . .
Use a microSD card . . . . .
Airplane mode . . . . . . . . .

.
.
.
.
.
.
.
.
.
.
.

27
27
27
28
28
28
29
29
29
30
30

Chapter 4. Accessories . . . . . . . . 33
Purchase options . . . . . . . . .
Docking station . . . . . . . . . .
Front view . . . . . . . . . .
Rear view . . . . . . . . . .
Attach a docking station. . . . .
Detach a docking station . . . .
Connect multiple external displays

.
.
.
.
.
.
.

33
33
34
35
36
37
38

Chapter 5. Secure your computer
and information . . . . . . . . . . . . 39
Lock the computer . . . . . . . . . . . .
Use passwords . . . . . . . . . . . . . .
Password types . . . . . . . . . . . .
Set, change, and remove a password . . .
Use Power Loss Protection function (for selected
models) . . . . . . . . . . . . . . . . .
Use the fingerprint reader (for selected models) .
Use face authentication (for selected models) . .
Use firewalls and antivirus programs. . . . . .

.
.
.
.

39
39
39
40

.
.
.
.

41
41
42
43

Chapter 6. Configure advanced
settings. . . . . . . . . . . . . . . . . 45
UEFI BIOS . . . . . . . . . . . . . . . . .
What is UEFI BIOS . . . . . . . . . . . .
Enter the UEFI BIOS menu . . . . . . . . .
Navigate in the UEFI BIOS interface . . . . .
Change the startup sequence . . . . . . .
Set the system date and time. . . . . . . .
Update UEFI BIOS . . . . . . . . . . . .
Recovery information . . . . . . . . . . . .
Restore system files and settings to an earlier
point . . . . . . . . . . . . . . . . .
Restore your files from a backup . . . . . .
Reset your computer . . . . . . . . . . .
Use advanced options . . . . . . . . . .
Windows automatic recovery. . . . . . . .
Create and use a recovery USB device . . . .
Install a Windows operating system and drivers . .

45
45
45
45
45
46
46
46
46
46
46
47
47
47
47

Chapter 7. CRU replacement . . . . . 49
What are CRUs . . . . . . . . . . . .
Disable Fast Startup and the built-in battery .
Replace a CRU . . . . . . . . . . . .
Base cover assembly . . . . . . . .
Wireless-WAN (for selected models) . .
M.2 solid-state drive . . . . . . . .

.
.
.
.
.
.

49
49
50
50
51
53

Always On USB 3.1 connector Gen 1 board
cable . . . . . . . . . . . . . . . . .

Chapter 8. Help and support . . . . . 57
Frequently asked questions . . . . .
Error messages . . . . . . . . . .
Beep errors . . . . . . . . . . .
Self-help resources . . . . . . . .
Call Lenovo . . . . . . . . . . .
Before you contact Lenovo . . .
Lenovo Customer Support Center .
Purchase additional services. . . . .

.
.
.
.
.
.
.
.

57
58
59
60
61
61
62
63

Appendix A. Important safety
information . . . . . . . . . . . . . . . 65

T495s and X395 User Guide

Appendix B. Accessibility and ergonomic
information . . . . . . . . . . . . . . . 79
Appendix C. Supplemental
information about the Linux operating
system . . . . . . . . . . . . . . . . . 81
Appendix D. Compliance and TCO
Certified information . . . . . . . . . . 83
Appendix E. Notices and
trademarks . . . . . . . . . . . . . . . 97

About this documentation
* Illustrations in this documentation might look different from your product.
* Depending on the model, some optional accessories, features, software programs, and user interface
instructions might not be applicable to your computer.
* Documentation content is subject to change without notice. To get the latest documentation, go to https://
pcsupport.lenovo.com.

iii

T495s and X395 User Guide

Chapter 1. Meet your computer
Front

1. Infrared camera*

2. ThinkShutter*

Slide ThinkShutter to cover or uncover the camera lens. It is designed to protect
your privacy.

3. Microphones*

Capture or record sound.
Take pictures or record videos by clicking Camera from the Start menu. The
indicator next to the camera is on when the camera is in use.

4. Camera*

5. Multi-touch screen*

If you use other apps that support photographing, video chatting, and video
conference, the camera starts automatically when you enable the camerarequired feature from the app.
Enable you to use your computer with simple touch gestures. See "Use the multitouch screen" on page 22.

* for selected models

Base
ThinkPad T495s

ThinkPad X395

T495s and X395 User Guide

Press to turn on the computer or put the computer to sleep mode.
To turn off the computer, open the Start menu, click
Shut down.

Power, and then select

The indicator in the power button shows the system status of your computer.
1. Power button

* Blinking for three times: The computer is initially connected to power.
* On: The computer is on.
* Off: The computer is off or in hibernation mode.
* Blinking rapidly: The computer is entering sleep or hibernation mode.
* Blinking slowly: The computer is in sleep mode.

2. Fingerprint reader*

3. Trackpad

Perform finger touch and all the functions of a traditional mouse. See "Use the
trackpad" on page 20.

4. TrackPoint(R) pointing device

Perform all the functions of a traditional mouse. See "Use the TrackPoint pointing
device" on page 19.

* for selected models

Chapter 1. Meet your computer

Left

1. USB-CTM connectors (USB 3.1
Gen 2)

* Charge your computer.
* Charge USB-C compatible devices with the output voltage and current of 5 V
and 1.5 A.
* Transfer data at USB 3.1 speed, up to 10 Gbps.
* Connect to an external display:
- USB-C to VGA: 1920 x 1200 pixels, 60 Hz
- USB-C to DP: 3840 x 2160 pixels, 60 Hz
* Connect to USB-C accessories to help expand your computer functionality. To
purchase USB-C accessories, go to https://www.lenovo.com/accessories.
* Supply power to another computer using P-to-P (Peer to Peer) 2.0 charging
function. See "Use P-to-P 2.0 charging function" on page 27.
Note: When the battery power is below 10%, the connected USB-C accessories
might not work correctly.

2. Ethernet extension connector
Gen 2

Make your computer thinner than the ones with a standard Ethernet connector.
Use a ThinkPad Ethernet Extension Adapter Gen 2 to connect your computer to a
local area network (LAN) through this connector. The ThinkPad Ethernet Extension
Adapter Gen 2 is available as an option and shipped with some computer models
only. You can purchase a ThinkPad Ethernet Extension Adapter Gen 2 from
Lenovo at: https://www.lenovo.com/accessories.
Note: The Ethernet extension connector Gen 2 and the adjoining USB-C
connector (USB 3.1 Gen 2) cannot be used simultaneously.

3. Docking-station connector

Connect the computer to one of the following supported docks to extend the
computer capabilities:
* ThinkPad Basic Docking Station
* ThinkPad Pro Docking Station
* ThinkPad Ultra Docking Station

T495s and X395 User Guide

4. USB 3.1 connector Gen 2

With greater data transfer rate, the USB 3.1 connector Gen 2 is used to connect
USB-compatible devices, such as a USB keyboard, a USB mouse, a USB storage
device, or a USB printer.

5. HDMITM connector

Connect to a compatible digital audio device or video monitor, such as an HDTV.
The HDMI connector on your computer supports the HDMI 2.0 standard by
default. If you connect an external display to your computer through the HDMI
connector with an HDMI 1.4 cable, the external display might not work. In this
case, do one of the following:
* Use a qualified HDMI 2.0 cable.
* Change the HDMI standard of the HDMI connector from 2.0 to 1.4. To change
the HDMI standard, enter the UEFI BIOS menu (see "Enter the UEFI BIOS
menu" on page 45), and then configure HDMI Mode Select in the Config
menu.

6. Audio connector

* Connect headphones with a 3.5-mm (0.14-inch) and 4-pole plug to listen to the
sound from the computer.
* Connect a headset with a 3.5-mm (0.14-inch) and 4-pole plug to listen to the
sound from the computer or talk with others.
Note: This connector does not support standalone external microphones.

Chapter 1. Meet your computer

Right

1. Smart-card slot*

Use smart cards for authentication, data storage, and application processing.
Within large organizations, you might also use smart cards for strong security
authentication of single sign-on (SSO). See "Use a smart card" on page 29.
With the Always On USB feature enabled, the Always On USB 3.1 connector Gen
1 can charge a USB-compatible device when the computer is on, off, in sleep
mode, or in hibernation mode.
Notes:
* By default, Always On USB is enabled and Charge in Battery Mode is
disabled in UEFI BIOS.

2. Always On USB 3.1 connector
Gen 1

* When the computer is off or in hibernation mode, and Charge in Battery Mode
is disabled in UEFI BIOS, ensure that you have connected the computer to ac
power.
To enable the Always On USB feature:
1. Enter the UEFI BIOS menu. See "Enter the UEFI BIOS menu" on page 45.
2. Click Config  USB  Always On USB to enable the Always On USB
feature.

3. Security-lock slot

* for selected models

T495s and X395 User Guide

Lock your computer to a desk, table, or other fixtures through a compatible
security cable lock. See "Lock the computer" on page 39.

Rear

The indicator in the ThinkPad logo on the computer lid and the indicator in the
power button show the system status of your computer.
* Blinks for three times: The computer is initially connected to power.
1. System status indicator

* On: The computer is on (in normal mode).
* Off: The computer is off or in hibernation mode.
* Blinks rapidly: The computer is entering sleep or hibernation mode.
* Blinks slowly: The computer is in sleep mode.

2. Nano-SIM-card and microSDcard slot

Use the microSD card to transfer or store files. See "Use a microSD card" on page
30. Use the Nano Subscriber Identity Module (SIM) card to connect to a wirelessWAN network. See "Connect to a cellular network" on page 14.

Chapter 1. Meet your computer

Bottom
ThinkPad T495s

ThinkPad X395

1. Docking-station hook holes

Use the docking-station hook holes to secure a supported docking station.
If the computer stops responding and you cannot turn it off by pressing the power
button, reset your computer:

2. Emergency-reset hole

1. Disconnect your computer from ac power.
2. Insert a straightened paper clip into the hole to cut off power supply
temporarily.
3. Connect your computer to ac power and then turn on your computer.

3. Speakers

T495s and X395 User Guide

Enable you to experience high-quality sound.

Features and specifications
ThinkPad T495s
* Width: 328.8 mm to 329.0 mm (12.94 inches to 12.95 inches)
* Depth: 225.8 mm to 226.15 mm (8.89 inches to 8.90 inches)
* Thickness: 16.95 mm to 17.55 mm (0.67 inches to 0.69 inches)
Dimensions
ThinkPad X395
* Width: 312 mm (12.28 inches)
* Depth: 217.2 mm (8.55 inches)
* Thickness: 17.8 mm (0.70 inches)
Maximum heat output
(depending on the model)

* 45 W (154 Btu/hr)

Power source (ac power
adapter)

* Sine-wave input at 50 Hz to 60 Hz

* 65 W (222 Btu/hr)

* Input rating of the ac power adapter: 100 V to 240 V ac, 50 Hz to 60 Hz

Microprocessor

To view the microprocessor information of your computer, right-click the Start
button and then click System.

Memory

Double data rate 4 (DDR4) memory module soldered on the system board, up to
16 GB

Storage device

M.2 solid-state drive
* Brightness control
* Color display with Thin Film Transistor (TFT) technology
* Color display with In-Plane Switching (IPS) technology (for ThinkPad T495s)
* Color display with In-Plane Switching (IPS) technology or Twisted Nematic (TN)
technology (for ThinkPad X395)
* Display size:

Display

- ThinkPad T495s: 355.6 mm (14 inches)
- ThinkPad X395: 337.82 mm (13.3 inches)
* Display resolution:
- ThinkPad T495s: 1920 x 1080 pixels
- ThinkPad X395: 1366 x 768 pixels or 1920 x 1080 pixels
* Multi-touch technology*
* Privacy Guard feature*
* Function keys

Keyboard

* Six-row keyboard or six-row keyboard with backlight
* Trackpad
* TrackPoint pointing device

Chapter 1. Meet your computer

* Audio connector
* Docking-station connector
* Ethernet extension connector Gen 2
* HDMI connector
Connectors and slots

* Nano-SIM-card and microSD-card slot
* One Always On USB 3.1 connector Gen 1
* One USB 3.1 connector Gen 2
* Smart-card slot*
* Two USB-C connectors (USB 3.1 Gen 2)
* Face authentication*
* Fingerprint reader*

Security features

* Password
* ThinkShutter*
* Security-lock slot
* Trusted Platform Module (TPM)*
* Bluetooth

Wireless features

* Global Positioning System (GPS) satellite receiver (available on models with
wireless WAN)*
* Wireless LAN
* Wireless WAN*

Others

* Camera*
* Microphones*

* for selected models

Statement on USB transfer rate
Depending on many factors such as the processing capability of the host and peripheral devices, file
attributes, and other factors related to system configuration and operating environments, the actual transfer
rate using the various USB connectors on this device will vary and will be slower than the data rate listed
below for each corresponding device.
USB device

Data rate (Gbit/s)

3.1 Gen 1

3.1 Gen 2

3.2

T495s and X395 User Guide

Chapter 2. Get started with your computer
Get started with Windows 10
Learn the basics of Windows 10 and start working with it right away. For more information about Windows
10, see the Windows help information.

Windows account
A user account is required to use the Windows operating system. It can either be a Windows user account or
a Microsoft account.
Windows user account
When you start Windows for the first time, you are prompted to create a Windows user account. This first
account you created is of the "Administrator" type. With an Administrator account, you can create additional
user accounts or change account types by doing the following:
1. Open the Start menu and select Settings  Accounts  Family & other users.
2. Follow the on-screen instructions.
Microsoft account
You can also log in to the Windows operating system with a Microsoft account.
To create a Microsoft account, go to the Microsoft sign-up page at https://signup.live.com and follow the onscreen instructions.
With a Microsoft account, you can:
* Enjoy one-time signing in if you are using other Microsoft services, such as OneDrive, Skype, and Outlook.
com.
* Sync personalized settings across other Windows-based devices.

Windows user interface

1. Account

Change account settings, lock the computer, or sign out from the current account.

2. Documents

Open the Documents folder, a default folder to save your received files.

3. Pictures

Open the Pictures folder, a default folder to save your received pictures.

4. Settings

Launch Settings.

5. Power

Shut down, restart, or put the computer into sleep mode.

6. Start button

Open the Start menu.

7. Windows Search

Type what you are looking for in the search box and get search results from your
computer and the Web.

8. Task View

Display all opened apps and switch among them.

9. Windows notification area

Display notifications and status of some features.

10. Battery status icon

Display power status and change battery or power settings. When your computer
is not connected to ac power, the icon changes to .

11. Network icon

Connect to an available wireless network and display the network status. When
connected to a wired network, the icon changes to
.

12. Action center

Display the latest notifications from apps and provide quick access to some
features.

Open the Start menu
* Click the Start button.
* Press the Windows logo key on the keyboard.
Access Control Panel
* Open the Start menu and click Windows System  Control Panel.

T495s and X395 User Guide

* Use Windows Search.
Launch an app
* Open the Start menu and select the app you want to launch.
* Use Windows Search.

Windows label
Your computer might have a Windows Genuine Microsoft label affixed to its cover depending on the
following factors:
* Your geographic location
* Edition of Windows that is preinstalled
Go to https://www.microsoft.com/en-us/howtotell/Hardware.aspx for illustrations of the various types of
Genuine Microsoft labels.
* In the People's Republic of China, the Genuine Microsoft label is required on all computer models
preinstalled with any edition of the Windows operating system.
* In other countries and regions, the Genuine Microsoft label is required only on computer models licensed
for Windows Pro editions.
The absence of a Genuine Microsoft label does not indicate that the preinstalled Windows version is not
genuine. For details on how to tell whether your preinstalled Windows product is genuine, refer to the
information provided by Microsoft at https://www.microsoft.com/en-us/howtotell/default.aspx.
There are no external, visual indicators of the Product ID or Windows version for which the computer is
licensed. Instead, the Product ID is recorded in the computer firmware. Whenever a Windows product is
installed, the installation program checks the computer firmware for a valid, matching Product ID to complete
the activation.
In some cases, an earlier Windows version might be preinstalled under the terms of the Windows Pro edition
license downgrade rights.

Connect to networks
Your computer helps you connect to the world through a wired or wireless network.

Connect to the wired Ethernet
Connect your computer to a local network through the Ethernet extension connector Gen 2 on your
computer with a ThinkPad Ethernet Extension Adapter Gen 2.
The Ethernet extension adapter is available as an option and shipped with some computer models. You can
purchase one from Lenovo at: https://www.lenovo.com/accessories.
Note: The Ethernet extension connector Gen 2 and the adjoining USB-C connector (USB 3.1 Gen 2) cannot
be used simultaneously.

Connect to Wi-Fi networks
Click the network icon in the Windows(R) notification area, and then select a network for connection. Provide
required information, if needed.

Chapter 2. Get started with your computer

Connect to a cellular network
If your computer has a wireless wide area network (WAN) card and a nano-SIM card installed, you can
connect to a cellular data network and get online using the cellular signal.
Note: The cellular service is provided by authorized mobile service carriers in some countries or regions.
You must have a cellular plan from a service carrier to connect to the cellular network.
To establish cellular connection:
1. Turn off the computer.
2. Insert a straightened paper clip into the hole in the tray 1 . The tray ejects. Install a nano-SIM card into
the tray with the metal contacts facing downward 2 . Insert the tray into the nano-SIM-card and
microSD-card slot until you hear a click 3 . If your computer has a nano-SIM card installed, skip this
step.

3. Turn on the computer.
4. Click the network icon in the Windows notification area, and then select the cellular network icon
the list.

from

5. Provide required information if needed.

Lenovo Commercial Vantage
The Lenovo Commercial Vantage app (hereafter referred to as Vantage app) is a customized one-stop
solution to help you maintain your computer with automated updates and fixes, configure hardware settings,
and get personalized support.
To access the Vantage app, type Lenovo Commercial Vantage in the Windows search box.
Notes:

T495s and X395 User Guide

* The available features vary depending on the computer model.
* The Vantage app makes periodic updates of the features to keep improving your experience with your
computer. The description of features might be different from that on your actual user interface. Ensure
that you use the latest version of Vantage app, and apply Windows Update to get the latest updates.
The Vantage app enables you to:
* Know the device status easily and customize device settings.
* Download and install UEFI BIOS, firmware, and driver updates to keep your computer up-to-date.
* Monitor your computer health, and secure your computer against outside threats.
* Scan your computer hardware and diagnose hardware problems.
* Look up warranty status (online).
* Access User Guide and helpful articles.

Interact with your computer
Your computer provides you various ways to navigate the screen.

Use privacy protection (for selected models)
Use the PrivacyGuard feature
Depending on the model, your computer might support the PrivacyGuard feature. When the feature is
enabled, it darkens screen and reduces visibility from side angles to protect screen content against visual
hacking. By default, the PrivacyGuard feature is disabled. You can press F12 or Fn+D to enable it. You will be
prompted by the on-screen icon
or
every time the feature is enabled or disabled.
The privacy level of this feature varies depending on the screen brightness level, the contrast ratio, and the
physical environment where you are using this feature.
* Press

to increase the privacy level.

* Press

to decrease the privacy level.

Automatic PrivacyGuard feature for passwords
Though the PrivacyGuard feature is disabled, the PrivacyGuard feature could also be automatically enabled
in case that you are required to input passwords. By default, this automatic PrivacyGuard feature for
passwords is disabled. You can enable it on the Vantage app.
Note: The automatic PrivacyGuard feature for passwords is not supported on computers with the Linux(R)
operating system.
Use PrivacyGuard with the PrivacyAlert feature
Glance by Mirametrix(R) is preinstalled on your computer. Turn on PrivacyAlert and PrivacyGuard switches
on Glance to achieve better privacy protection.
When someone is detected looking over your shoulder by the camera (with IR function), an alert icon appears
on your computer screen. Meanwhile, PrivacyAlert automatically enables PrivacyGuard to prevent peeking
eyes. When the person leaves, the icon disappears and the PrivacyGuard feature is disabled automatically.

Chapter 2. Get started with your computer

T495s and X395 User Guide

Use the keyboard shortcuts
The special keys on the keyboard help you work more easily and effectively.
ThinkPad T495s

ThinkPad X395

Open the Start menu.
1. Windows logo key

For information about using this key with other keys, see the Windows help
information.
Switch the letter case between the upper case and lower case.

2. Caps Lock key
When the key indicator is on, you can type uppercase letters.
Invoke the special function printed as an icon on each key or standard function.
To choose whether to invoke the special function or standard function:
3. F1-F12 function keys

1. Go to Control Panel and view by Large icons or Small icons.
2. Click Keyboard or Lenovo - Keyboard Manager and select the option of
your preference.

Chapter 2. Get started with your computer

Switch the function of the F1-F12 keys between the standard function and special
function printed as an icon on each key.
When the Fn Lock indicator is on:
* Press F1-F12 to use the standard function.
* Press Fn+F1-F12 to use the special function.
When the Fn Lock indicator is off:
* Press Fn+F1-F12 to use the standard function.
* Press F1-F12 to use the special function.
Mute or unmute the speakers.
When the key indicator is on, the speakers are muted.
If you mute the speakers and turn off your computer, the speakers remain muted
when you turn on your computer.
Decrease the speaker volume.
Increase the speaker volume.
Mute or unmute the microphones.
When the key indicator is on, the microphones are muted.
Darken the computer display.
Brighten the computer display.
Manage external displays.
Enable or disable the built-in wireless features.
Open the Settings window.
Enable or disable the built-in Bluetooth features.
Open a keyboard setting page.
Invoke the function defined by yourself.
Open Lenovo Vantage, you can define different functions for the F12 key.
Open the Snipping Tool program.

Fn+Spacebar

Switch between different keyboard backlight statuses if your computer supports
keyboard backlight.

Fn+B

Equal the Break key on a conventional external keyboard.

Fn+K

Equal the ScrLK or Scroll Lock key on a conventional external keyboard.

Fn+P

Equal the Pause key on a conventional external keyboard.

Fn+S

Equal the SysRq key on a conventional external keyboard.

T495s and X395 User Guide

Fn+4

Put the computer to sleep mode. To wake up the computer, press Fn or the power
button.

Fn+D (for selected models)

If your computer supports the Privacy Guard feature, press Fn+D to enable or
disable this feature. For more information, see "Use privacy protection (for
selected models)" on page 15

Fn+Left arrow key

Equal the Home key.

Fn+Right arrow key

Equal the End key.

Use the TrackPoint pointing device
The TrackPoint pointing device enables you to perform all the functions of a traditional mouse, such as
pointing, clicking, and scrolling.
Use the TrackPoint pointing device

1. Pointing stick
Use your index finger or middle finger to apply pressure to the pointing-stick nonslip cap in any direction
parallel to the keyboard. The pointer on the screen moves accordingly but the pointing stick itself does not
move. The higher the pressure applied, the faster the pointer moves.
2. Left-click button
Press to select or open an item.
3. Right-click button
Press to display a shortcut menu.
4. Middle button
Press and hold the dotted middle button while applying pressure to the pointing stick in the vertical or
horizontal direction. Then, you can scroll through the document, Web site, or apps.

Chapter 2. Get started with your computer

Disable the TrackPoint pointing device
The TrackPoint pointing device is active by default. To disable the device:
1. Open the Start menu, and then click Settings  Devices  Mouse.
2. Follow the on-screen instructions to disable TrackPoint.
Replace the pointing-stick nonslip cap
Note: Ensure that the new cap has grooves a .

Use the trackpad
The entire trackpad surface is sensitive to finger touch and movement. You can use the trackpad to perform
all the pointing, clicking, and scrolling functions of a traditional mouse.
Use the trackpad

1. Left-click zone
Press to select or open an item.
You also can tap anywhere on the surface of the trackpad with one finger to perform the left-click action.
2. Right-click zone
Press to display a shortcut menu.

T495s and X395 User Guide

You also can tap anywhere on the surface of the trackpad with two fingers to perform the right-click action.
Use the touch gestures
Tap
Tap anywhere on the trackpad with one finger to select or open an
item.

Two-finger tap
Tap anywhere on the trackpad with two fingers to display a shortcut
menu.

Two-finger scroll
Put two fingers on the trackpad and move them in the vertical or
horizontal direction. This action enables you to scroll through the
document, Web site, or apps.

Two-finger zoom out
Put two fingers on the trackpad and move them closer together to
zoom out.

Two-finger zoom in
Put two fingers on the trackpad and move them farther apart to zoom
in.

Chapter 2. Get started with your computer

Swipe three fingers up
Put three fingers on the trackpad and move them up to open the task
view to see all your open windows.

Swipe three fingers down
Put three fingers on the trackpad and move them down to show the
desktop.

Notes:
* When using two or more fingers, ensure that you position your fingers slightly apart.
* Some gestures are not available if the last action was done from the TrackPoint pointing device.
* Some gestures are only available when you are using certain apps.
* If the trackpad surface is stained with oil, turn off the computer first. Then, gently wipe the trackpad
surface with a soft and lint-free cloth moistened with lukewarm water or computer cleaner.
For more gestures, see the help information of the pointing device.
Disable the trackpad
The trackpad is active by default. To disable the device:
1. Open the Start menu, and then click Settings  Devices  Touchpad.
2. In the Touchpad section, turn off the Touchpad control.

Use the multi-touch screen
If your computer display supports the multi-touch function, you can navigate the screen with simple touch
gestures.
Note: Some gestures might not be available depending on the app you use.
Tap once
* From the Start menu: Open an app or item.
* From the desktop: Select an app or item.
* In an open app: Perform an action such as Copy, Save, and
Delete, depending on the app.

Tap twice quickly
Open an app or item from the desktop.

T495s and X395 User Guide

Tap and hold
Open a shortcut menu.

Slide
Scroll through items, such as lists, pages, and photos.

Drag an item to the location you want
Move an object.

Move two fingers closer together
Zoom out.

Move two fingers farther apart
Zoom in.

Swipe in from the right edge
Open the action center to see your notifications and quick actions.

Chapter 2. Get started with your computer

Swipe in from the left edge
View all your open windows in task view.

* Swipe downwards shortly from the top edge (for full-screened
app or when your computer is in the tablet mode)
Show a hidden title bar.
* Swipe in from the top edge to the bottom edge (when your
computer is in the tablet mode)
Close the current app.

Tips
* Turn off the computer before cleaning the multi-touch screen.
* Use a dry, soft, and lint-free cloth or a piece of absorbent cotton to remove fingerprints or dust from the
multi-touch screen. Do not apply solvents to the cloth.
* The multi-touch screen is a glass panel covered with a plastic film. Do not apply pressure or place any
metallic object on the screen, which might damage the touch panel or cause it to malfunction.
* Do not use fingernails, gloved fingers, or inanimate objects for input on the screen.
* Regularly calibrate the accuracy of the finger input to avoid a discrepancy.

Use multimedia
Use your computer for business or entertainment with the built-in components (camera, speakers, and audio
features) or connected external devices (an external projector, monitor, and HDTV).

Use audio
To enhance your listening experience, connect speakers, headphones, or a headset with a 3.5-mm (0.14inch), 4-pole plug to the audio connector.
Adjust the speaker volume
Press

to increase the speaker volume or press

to decrease the speaker volume.

Change the sound settings
1. Go to Control Panel and view by category.
2. Click Hardware and Sound  Sound.
3. Change the settings as you prefer.

Use the camera
You can use the built-in camera to take photos or record videos. The indicator next to the camera turns on
when the camera is in use.
To take photos or record videos:

T495s and X395 User Guide

1. If your computer is equipped with a ThinkShutter, slide the ThinkShutter to the right to unveil the camera
lens.
2. Open the Start menu and click Camera.
3. To take photos, click the camera icon. If you want to record videos, click the video icon to switch to
video mode.
If you use other programs that provide features such as photographing, video capturing, and video
conference, the camera starts automatically when you enable the camera-required feature.

Connect to an external display
Connect your computer to a projector or a monitor to give presentations or expand your workspace.
Connect to a wired display
1. Connect the external display to an appropriate video connector on your computer, such as the HDMI
connector, or the USB-C connector (USB 3.1 Gen 2).
2. Connect the external display to an electrical outlet.
3. Turn on the external display.
If your computer cannot detect the external display, right-click a blank area on the desktop, and then click
Display settings  Detect.
Supported resolution
The following table lists the supported maximum resolution of the external display.
Connect the external display to

Supported resolution

the USB-C connector (USB 3.1 Gen 2)

Up to 4096 x 2160 pixels / 60 Hz

the HDMI connector

Up to 4096 x 2160 pixels / 24 Hz

Connect to a wireless display
To use a wireless display, ensure that both your computer and the external display support the Miracast(R)
feature.
* Open the Start menu, and then click Settings  Devices  Bluetooth & other devices  Add
Bluetooth or other device. In the Add a device window, click Wireless display or dock. Then, follow the
instructions on the screen.
in the Windows notification area and click Connect. Select the wireless
* Click the action center icon
display and follow the on-screen instructions.
Set the display mode
Press

and then select a display mode of your preference.

* PC screen only: Displays the video output only on your computer screen.
Note: Depending on the situation, you might see Disconnect, PC screen only, Computer only, or
Disconnect projector.
* Duplicate: Displays the same video output on both your computer screen and an external display.
* Extend: Extends the video output from your computer display to an external display. You can drag and
move items between the two displays.

Chapter 2. Get started with your computer

* Second screen only: Displays the video output only on an external display.
Note: Depending on the situation, you might see Projector only or Second screen only.
If you show programs using DirectDraw or Direct3D(R) in full-screen mode, only the main display shows the
video output.
Change display settings
1. Right-click a blank area on the desktop and select Display settings.
2. Select the display that you want to configure.
3. Change display settings of your preference.
You can change the settings for both the computer display and the external display. For example, you can
define which one is the main display and which one is the secondary display. You also can change the
resolution and orientation.
Note: If you set a higher resolution for the computer display than the external display, only part of the screen
can be displayed on the external display.

T495s and X395 User Guide

Chapter 3. Explore your computer
Manage power
Use the information in this section to achieve the best balance between performance and power efficiency.

Check the battery status
Go to Settings  System to check the battery status. For more details about your battery, refer to the
Vantage app.

Charge the computer
Use ac power
When the battery power is low, charge your battery by connecting your computer to ac power.
The battery is fully charged in about four to eight hours. If the power adapter shipped with your computer
supports the rapid charge function, the battery is 80% charged in about one hour when the computer is
turned off. The actual charging time depends on the battery size, the physical environment, and whether you
are using the computer.
Battery charging is also affected by the battery temperature. The recommended battery temperature range
for charging the battery is between 10C (50F) and 35C (95F).
Notes:
* To maximize the life of the battery, once the battery is fully charged, it must discharge to 94% or lower
before it will be allowed to recharge again.
* To extend your battery's lifespan, the battery may optimize its full charge capacity based on your usage.
After prolonged periods of limited use, full battery capacity may not be available until you discharge to as
low as 20% and recharge completely. For more information, refer to the power section of Lenovo Vantage.
Use P-to-P 2.0 charging function
Both the USB-C connectors (USB 3.1 Gen 2) on the computer feature the Lenovo-unique P-to-P 2.0
charging function. When no ac power is available, this feature enables one computer to supply power to
another computer through a USB-C to USB-C cable. When ac power is available for only one computer, this
feature enables both computers to get charged by ac power.
To use the function, ensure that:
* The selected connectors support the P-to-P 2.0 charging function and power delivery function.
* Always On USB and Charge in Battery Mode are enabled in UEFI BIOS of both computers, so that the
function works even when the computers are off or in hibernation mode. To enable Always On USB and
Charge in Battery Mode:
1. Enter the UEFI BIOS menu. See "Enter the UEFI BIOS menu" on page 45.
2. Click Config  USB to enable Always On USB and Charge in Battery Mode.
To use the function:
* When no ac power is available:

The remaining battery power of computer A should be at least 30% and be 3% higher than that of
computer B. To check the battery status, see "Check the battery status" on page 27. Connect the
computers to each other with a USB-C to USB-C cable. In this situation, computer A works as the power
supply. Once the remaining battery power of computer A is lower than 30%, computer A stops supplying
power to computer B.

* When ac power is available:
Connect the computers to each other with a USB-C to USB-C cable. Connect one computer to ac power.
In this situation, ac power works as the power supply and both computers get charged.

Note: The actual charging speed using the Lenovo-unique P-to-P 2.0 charging function varies depending on
many factors, such as the remaining battery power of the computers, the wattage of the ac power adapter,
and whether you are using the computers.

Maximize the battery life
* Lower the brightness of the computer display.
* Turn off the wireless features when not in use.
* Use the battery until the charge is depleted.
* Recharge the battery completely before using it.

Set power button behaviors
You can define what the power button does according to your preference. For example, by pressing the
power button, you can turn off the computer or put the computer to sleep or hibernation mode.
To change what the power button does:
1. Right-click the battery status icon in the Windows notification area.
2. Click Power Options  Choose what the power buttons do.
3. Change the settings as you prefer.

Set the power plan
For ENERGY STAR(R) compliant computers, the following power plan takes effect when your computers have
been idle for a specified duration:

T495s and X395 User Guide

Table 1. Default power plan (when plugged into ac power)
* Turn off the display: After 10 minutes
* Put the computer to sleep: After 30 minutes

To reset the power plan to achieve the best balance between performance and power saving:
1. Right-click the battery status icon and select Power Options.
2. Choose or customize a power plan of your preference.

Transfer data
Quickly share your files using the built-in Bluetooth among devices with the same feature. You also can insert
a microSD card or a smart card to transfer data.

Set up a Bluetooth connection
You can connect all types of Bluetooth-enabled devices to your computer, such as a keyboard, a mouse, a
smartphone, or speakers. To ensure successful connection, place the devices at most 10 meters (33 feet)
from the computer.
1. Type Bluetooth in the Windows search box and then press Enter.
2. Turn on Bluetooth, if it is off.
3. Select a Bluetooth device, and then follow the on-screen instructions.

Use a smart card
If your computer has a smart-card slot, read the following information.
Supported smart card
Supported smart card specifications: 85.60 mm (3.37 inches) x 53.98 mm (2.13 inches)
Attention: Smart cards with slits are not supported. Do not insert such a smart card into the smart-card
reader of your computer. Otherwise, the reader might get damaged.

Install the card
1. Locate the card slot. See "Right" on page 6.
2. Insert the card firmly into the card slot until it is secured in place. Ensure that the metal contacts are
facing upward and pointing toward the card slot.
Remove the card
Attention: Before removing a card, eject the card from the Windows operating system first. Otherwise, data
on the card might get corrupted or lost.

Chapter 3. Explore your computer

1. Click the triangular icon in the Windows notification area to show hidden icons. Then, right-click the
Safely Remove Hardware and Eject Media icon.
2. Select the corresponding item to eject the card from the Windows operating system.
3. Press the card and remove it from your computer. Store the card safely for future use.

Use a microSD card
Your computer has a nano-SIM-card and microSD-card slot on the rear of the computer.
Supported microSD card
* Secure Digital (SD) card
* Secure Digital eXtended-Capacity (SDXC) USH-1 card
* Secure Digital High-Capacity (SDHC) USH-1 card
Attention:
* Before handling the microSD card, touch a metal table or a grounded metal object. Otherwise, the card
might get damaged by the static electricity from your body.
* During the data transfer, do not put your computer into sleep mode; otherwise, your data could get
damaged.
Replace or install a microSD card:
Note: Depending on the model, your nano-SIM-card and microSD-card tray might look slightly different
from the illustrations in this topic.
1. Insert a straightened paper clip into the hole in the tray. The tray ejects. Then, slide the tray out of the
computer. If a microSD card is installed, gently take the microSD card out of the tray.

2. Install a new microSD card into the tray with the metal contacts facing downward. Insert the tray into the
nano-SIM-card and microSD-card slot until you hear a click.

Airplane mode
When the Airplane mode is enabled, all wireless features are disabled.
1. Click the action center icon

T495s and X395 User Guide

in the Windows notification area.

2. Click Airplane mode to turn on the Airplane mode.

Chapter 3. Explore your computer

T495s and X395 User Guide

Chapter 4. Accessories
This chapter provides instructions on how to use hardware accessories to expand your computer
capabilities.

Purchase options
Lenovo has a number of hardware accessories and upgrades to help expand the capabilities of your
computer. Options include memory modules, storage devices, network cards, port replicators or docking
stations, batteries, power adapters, keyboards, mice, and more.
To shop at Lenovo, go to https://www.lenovo.com/accessories.

Docking station
You can use the following docking stations to extend the capacity of your computer:
* ThinkPad Basic Docking Station
* ThinkPad Pro Docking Station
* ThinkPad Ultra Docking Station

Front view
Note: The following illustration is based on ThinkPad Basic Docking Station. The ThinkPad Pro Docking
Station and ThinkPad Ultra Docking Station might look slightly different.

Use the system lock in the following ways:

1. System lock

* Locked position
computer.

: The latch is locked, and you cannot attach or detach your

* Unlocked position
your computer.

: The latch is unlocked, and you can attach or detach

* Removal position
slot.

: You can remove the system lock from the system-lock

Note: The ThinkPad Basic Docking Station does not ship with a system lock
installed. You can contact Lenovo sales to purchase a system lock with the option
part number 4XE0Q56388.
2. Key lock indicator

This indicator turns on when the system lock key is in the locked position.

3. Docking status indicator

This indicator turns on when your computer is successfully connected to the
docking station.

4. Power button

Press the power button to turn on or turn off the computer attached to the
docking station.

5. Guide post

Use the guide post to help you position your computer properly when you attach
the computer to the docking station.

6. Docking-station connector

Connect the computer to the docking station.

7. Hooks

Hold and secure the computer to the docking station.

8. Latch

Slide the latch to attach or detach the computer.

T495s and X395 User Guide

Rear view

Figure 1. ThinkPad Basic Docking Station

Figure 2. ThinkPad Pro Docking Station

Figure 3. ThinkPad Ultra Docking Station
Connectors

ThinkPad Basic Docking
Station

ThinkPad Pro Docking
Station

ThinkPad Ultra Docking
Station

1. Audio connector

2. ac power connector

3. DisplayPort(R) connector

4. VGA connector

5. USB 2.0 connector

6. Always On USB 3.1
connector Gen 1

7. USB 3.1 connector Gen
1

8. Ethernet connector

9. Security-lock slot

10. USB-C connector

11. HDMI connector

12. Always On USB 3.1
connector Gen 2

13. USB 3.1 connector Gen
2

Chapter 4. Accessories

Note: The security-lock slot supports cable locks that conform to the Kensington MicroSaver lock standards
(using T-bar locking technology) or MiniSaver lock standards (using Cleat locking technology).

Attach a docking station
Notes:
* The ThinkPad Basic Docking Station does not ship with a system lock installed. If you do not purchase
and install a system lock, skip step 4 and step 7 in the following instruction.
* If you do not connect the docking station to ac power, the computer attached runs on battery power.
1. Connect the docking station to ac power.
2. Disconnect the cables and devices from the left side of the computer.
3. Turn the system lock key to the unlocked position (

4. Align the top-left corner of the computer with the guide post of the docking station. Attach your
computer to the docking station as shown 1 until you hear a click. Slide the latch in the direction as
shown 2 .

T495s and X395 User Guide

5. Check the docking status indicator. The docking status indicator turns on when the computer is
successfully docked.
Note: If the indicator is off, your computer is not attached to the docking station successfully. To solve
the problem, detach and reattach the computer.
6. Turn the system lock key to the locked position (

Attention: When the computer is attached to a docking station, always hold the whole assembly when you
need to move your computer. Otherwise, the docking station might drop down.

Detach a docking station
Note: The ThinkPad Basic Docking Station does not ship with a system lock installed. If you do not
purchase and install a system lock, skip step 1 in the following instruction.
1. Turn the system lock key to the unlocked position (

Chapter 4. Accessories

2. Slide the latch in the direction as shown 1 to release the computer, and then grasp both sides of the
computer to remove it 2 .

Connect multiple external displays
You can connect multiple external displays to a supported docking station. To ensure that the multiple
displays work correctly, observe the following guidelines and connect the external displays to the
appropriate connectors.
Docking station

Supported external displays

ThinkPad Basic Docking Station

Up to two

Video connectors
DisplayPort
VGA

ThinkPad Pro Docking Station

Up to two

DisplayPort (x2)
DisplayPort (x2)

ThinkPad Ultra Docking Station

Up to three

HDMI
VGA

T495s and X395 User Guide

Chapter 5. Secure your computer and information
Lock the computer
Lock your computer to a desk, table, or other fixtures through a compatible security cable lock.
Note: The slot supports cable locks that conform to the Kensington MicroSaver(R) lock standards (using TbarTM locking technology) or MiniSaver(R) lock standards (using CleatTM locking technology). You are
responsible for evaluating, selecting, and implementing the locking device and security feature. Lenovo
makes no comments, judgments, or warranties about the function, quality, or performance of the locking
device and security feature. Cable locks for your product are available from Lenovo at https://
www.lenovoquickpick.com/.

Use passwords
This section introduces types of passwords in UEFI (Unified Extensible Firmware Interface) BIOS (Basic
Input/Output System) and how to set, change, and remove a password.

Password types
You can set a power-on password, supervisor password, or hard disk password in UEFI BIOS to prevent
unauthorized access to your computer. However, you are not prompted to enter any UEFI BIOS password
when your computer resumes from sleep mode.
Power-on password
If you set a power-on password, a window is displayed on the screen when you turn on the computer. Enter
the correct password to use the computer.

Supervisor password
The supervisor password protects the system information stored in UEFI BIOS.When entering the UEFI BIOS
menu, enter the correct supervisor password in the window prompted. You also can press Enter to skip the
password prompt. However, you cannot change most of the system configuration options in UEFI BIOS.
If you have set both the supervisor password and power-on password, you can use the supervisor password
to access your computer when you turn it on. The supervisor password overrides the power-on password.
Hard disk passwords
The hard disk password prevents unauthorized access to the data on the storage drive. When a hard disk
password is set, you are prompted to type a correct password each time you try to access the storage drive.
To set the hard disk password, select one of the following types:
* User hard disk password only
When a user hard disk password is set without a master hard disk password, the user must enter the user
hard disk password to access files and applications on the storage drive.
* Master hard disk password + User hard disk password
The master hard disk password is set and used by a system administrator. It enables the administrator to
access any storage drive in a system or any computer connected in the same network. The administrator
can also assign a user hard disk password for each computer in the network. The user of the computer
can change the user hard disk password as desired, but only the administrator can remove the user hard
disk password.
When prompted to enter a hard disk password, press F1 to switch between the master hard disk password
and user hard disk password.
Note: The hard disk password is not available in the following situations:
* A Trusted Computing Group (TCG) Opal-compliant storage drive and a TCG Opal management software
program are installed in the computer, and the TCG Opal management software program is activated.
* An eDrive storage drive is installed in the computer preinstalled with the Windows 10 operating system.

Set, change, and remove a password
Before you start, print these instructions.
1. Restart the computer. When the logo screen is displayed, press F1 to enter the UEFI BIOS menu.
2. Select Security  Password by using the arrow keys.
3. Select the password type. Then, follow the on-screen instructions to set, change, or remove a
password.
You should record all your passwords and store them in a safe place. If you forget any of your passwords,
any potential repair actions required are not covered under warranty.
What to do if you forget your power-on password
If you forget your power-on password, do the following to remove the power-on password:
* If you have set a supervisor password and remember it:
1. Restart the computer. When the logo screen is displayed, immediately press F1.
2. Type the supervisor password to enter the UEFI BIOS menu.
3. Select Security  Password  Power-On Password by using the arrow keys.

T495s and X395 User Guide

4. Type the current supervisor password in the Enter Current Password field. Then, leave the Enter
New Password field blank, and press Enter twice.
5. In the Changes have been saved window, press Enter.
6. Press F10 to save changes and exit the UEFI BIOS menu.
* If you have not set a supervisor password, contact a Lenovo authorized service provider to have the
power-on password removed.
What to do if you forget your hard disk password
If you forget your user hard disk password or both user and master hard disk passwords, Lenovo cannot
reset your passwords or recover data from the storage drive. You can contact a Lenovo authorized service
provider to have the storage drive replaced. A fee will be charged for parts and service. If the storage drive is
a CRU (Customer Replaceable Unit), you can also contact Lenovo to purchase a new storage drive to
replace the old one by yourself. To check whether the storage drive is a CRU and the relevant replacement
procedure, see Chapter 7 "CRU replacement" on page 49.
What to do if you forget your supervisor password
If you forget your supervisor password, there is no service procedure to remove the password. You have to
contact a Lenovo authorized service provider to have the system board replaced. A fee will be charged for
parts and service.

Use Power Loss Protection function (for selected models)
For models shipped with an NVMe (Non-Volatile Memory express) M.2 solid-state drive, the M.2 solid-state
drive features the Lenovo-unique PLP (Power Loss Protection) function to avoid data loss or damage. On
very rare occasions, your computer is not responding and you might have to shut down your computer by
pressing and holding the power button for about seven seconds. In this case, the PLP function enables key
data of your computer to be saved timely. However, there is no guarantee that all data is saved in any
situation. To check the type of your M.2 solid-state drive:
1. Restart the computer. When the logo screen is displayed, press F10 to enter the Lenovo diagnostics
window.
2. On the TOOLS tab, select SYSTEM INFORMATION  STORAGE using the arrow keys.
3. Locate the Device Type section to check the information.

Use the fingerprint reader (for selected models)
If your computer comes with a fingerprint reader, you can use it to enroll your fingerprints. After enrollment,
you can tap your finger on the fingerprint reader to log in to Windows.
Enroll your fingerprints
Open the Start menu and then click Settings  Accounts  Sign-in options. Then, follow the on-screen
instructions to finish the enrollment.
During the enrollment, the fingerprints are associated with the Windows password automatically. It is
recommended that you put your finger at the middle of the fingerprint reader during enrollment and enroll
more than one fingerprint in case of any injuries to your fingers.

Chapter 5. Secure your computer and information

Associate your fingerprints with your power-on password and hard disk password
1. Turn off and then turn on the computer.
2. When prompted, scan your finger on the fingerprint reader.
3. Enter your power-on password, hard disk password, or both as required. The connection is created.
When you start the computer again, you can use your fingerprints to log in to the computer without entering
your Windows password, power-on password, or hard disk password. To change the settings, go to the
UEFI BIOS menu.
Attention: If you always use your fingerprint to log in to the computer, you might forget your passwords.
Write down your passwords, and keep them in a safe place.
Maintain the fingerprint reader
To ensure that the fingerprint reader works correctly, do not:
* Scratch the surface of the reader with anything hard.
* Use or touch the reader with a wet, dirty, wrinkled, or injured finger.

Use face authentication (for selected models)
If your computer comes with a Windows Hello-compatible infrared camera, you can unlock your computer by
scanning your face instead of using a password.
Note: If your computer is equipped with a ThinkShutter, slide the ThinkShutter to uncover the camera lens
before using the Windows Hello face recognition.
Create face ID
1. Open the Start menu and click Settings  Accounts  Sign-in options.
2. Scroll down to the Password section and click Add to create a password.
3. Follow the on-screen instructions to create a Personal Identification Number (PIN).
4. Locate the Windows Hello section and click Set up under Face Recognition. Then, click Get Started.
5. Enter the PIN you have set earlier. The camera preview starts.
6. Follow the on-screen instructions to complete the setup.
7. Click Improve Recognition to improve the image so that Windows Hello can recognize you in different
light conditions or when your appearance changes.
Log in with face authentication
1. On the Windows lock screen, select the smiling face icon

T495s and X395 User Guide

from the sign-in options.

2. Follow the on-screen instructions and ensure that you are centered and looking directly at the camera.
When the program recognizes your face, it automatically unlocks the screen and signs you in to the
Windows operating system.

Use firewalls and antivirus programs
Your computer might be preinstalled with a firewall program. The firewall protects against computer Internet
security threats, unauthorized access, intrusions, and Internet attacks. It also protects your privacy.
A full version of antivirus program is provided with a free 30-day subscription. After 30 days, you must renew
the license to continue receiving the antivirus program updates.
For more information, see the help system of the program.

Chapter 5. Secure your computer and information

T495s and X395 User Guide

Chapter 6. Configure advanced settings
This chapter provides information about UEFI BIOS, RAID, recovery, operating system installation, and
system management.

UEFI BIOS
This section introduces what is UEFI BIOS and the operations you can perform in UEFI BIOS.

What is UEFI BIOS
UEFI BIOS is the first program that the computer runs when the computer is turned on. UEFI BIOS initializes
the hardware components and loads the operating system and other programs. Your computer comes with a
setup program with which you can change UEFI BIOS settings.

Enter the UEFI BIOS menu
Restart the computer. When the logo screen is displayed, press F1 to enter the UEFI BIOS menu.
Note: If you have set the supervisor password, enter the correct password when prompted. You also can
press Enter to skip the password prompt and enter the UEFI BIOS menu. However, you cannot change the
system configurations that are protected by the supervisor password.

Navigate in the UEFI BIOS interface
Attention: The default configurations are already optimized for you in boldface. Improper change of the
configurations might cause unexpected results.
You can navigate in the UEFI BIOS interface by pressing the following keys:
F1

Display the General Help screen.

Restore to the default settings.

F10

Save your configuration and exit.

F5 / -

Change to a lower value.

F6 / +

Change to a higher value.

Locate an item.

Select a tab.

Esc

Exit the submenu and return to the parent menu.

Enter

Enter the selected tab or submenu.

Change the startup sequence
1. Restart the computer. When the logo screen is displayed, press F1.
2. Select Startup  Boot. Then, press Enter. The default device order list is displayed.
Note: No bootable device is displayed if the computer cannot start from any devices or the operating
system cannot be found.
3. Set the startup sequence as desired.

4. Press F10 to save the changes and exit.
To change the startup sequence temporarily:
1. Restart the computer. When the logo screen is displayed, press F12.
2. Select the device that you want the computer to start from and press Enter.

Set the system date and time
1. Restart the computer. When the logo screen is displayed, press F1.
2. Select Date/Time and set the system date and time as desired.
3. Press F10 to save changes and exit.

Update UEFI BIOS
When you install a new program, device driver, or hardware component, you might need to update UEFI
BIOS.
Download and install the latest UEFI BIOS update package by one of the following methods:
* Open the Vantage app to check the available update packages. If the latest UEFI BIOS update package is
available, follow the on-screen instructions to download and install the package.
* Go to https://pcsupport.lenovo.com and select the entry for your computer. Then, follow the on-screen
instructions to download and install the latest UEFI BIOS update package.

Recovery information
This section introduces the recovery information of the Windows operating system. Ensure that you read and
follow the on-screen recovery instructions. The data on your computer might be deleted during the recovery
process. To avoid data loss, make a backup copy of all the data that you want to keep.

Restore system files and settings to an earlier point
1. Go to Control Panel and view by Large icons or Small icons.
2. Click Recovery  Open System Restore. Then, follow the on-screen instructions.

Restore your files from a backup
Note: If you use the File History tool to restore your files from a backup, ensure that you backed up your
data earlier with the tool.
1. Go to Control Panel and view by Large icons or Small icons.
2. Click File History  Restore personal files. Then, follow the on-screen instructions.

Reset your computer
In the resetting process, you can choose to keep your files or remove them when you reinstall the operating
system.
Note: The items in the graphical user interface (GUI) might change without notice.
1. Open the Start menu, and then click Settings  Update & Security  Recovery.
2. In the Reset this PC section, click Get started.
3. Follow the on-screen instructions to reset your computer.

T495s and X395 User Guide

Use advanced options
Note: The items in the graphical user interface (GUI) might change without notice.
1. Open the Start menu, and then click Settings  Update & security  Recovery.
2. In the Advanced startup section, click Restart now  Troubleshoot  Advanced options.
3. Select a preferred option, and then follow the on-screen instructions.

Windows automatic recovery
Note: Ensure that your computer is connected to ac power during the recovery process.
The Windows recovery environment on your computer operates independently from the Windows operating
system. It enables you to recover or repair the operating system even if the Windows operating system fails
to start.
After two consecutive failed boot attempts, the Windows recovery environment starts automatically. Then
you can choose repair and recovery options by following the on-screen instructions.

Create and use a recovery USB device
It is recommended that you create a recovery USB drive as early as possible as a backup for the Windows
recovery programs. With the recovery USB drive, you can troubleshoot and fix the problems even if the
preinstalled Windows recovery programs are damaged. If you did not create a recovery USB drive as a
precautionary measure, you can contact Lenovo Customer Support Center and purchase one from Lenovo.
For a list of the Lenovo Support phone numbers for your country or region, go to:
https://pcsupport.lenovo.com/supportphonelist

Create a recovery USB drive
Attention: The creation process deletes anything stored on the USB drive. To avoid data loss, make a
backup copy of all the data that you want to keep.
1. Ensure that your computer is connected to ac power.
2. Prepare a USB drive with at least 16 GB of storage capacity. The actual USB capacity required depends
on the size of the recovery image.
3. Connect the prepared USB drive to the computer.
4. Type recovery in the search box. Then, click Create a recovery drive.
5. Click Yes in the User Account Control window to allow the Recovery Media Creator program to start.
6. In the Recovery Drive window, follow the on-screen instructions to create a recovery USB drive.
Use the recovery USB drive
1. Ensure that your computer is connected to ac power.
2. Connect the recovery USB drive to the computer.
3. Turn on or restart the computer. When the logo screen is displayed, press F12. The Boot Menu window
opens.
4. Select the recovery USB drive as the boot device. Then, follow the on-screen instructions to complete
the process.

Install a Windows operating system and drivers
This section provides instructions on installing a Windows operating system and device drivers.

Chapter 6. Configure advanced settings

Install a Windows operating system
Microsoft(R) constantly makes updates to the Windows operating system. Before installing a particular
Windows version, check the compatibility list for the Windows version. For details, go to https://
support.lenovo.com/us/en/solutions/windows-support.
Attention:
* It is recommended that you update your operating system through official channels. Any unofficial update
might cause security risks.
* The process of installing a new operating system deletes all the data on your internal storage drive,
including the data stored in a hidden folder.
1. If you are using the Windows BitLocker(R) Drive Encryption feature and your computer has a Trusted
Platform Module, ensure that you have disabled the feature.
2. Ensure that the security chip is set to Active.
a. Restart the computer. When the logo screen is displayed, press F1 to enter the UEFI BIOS menu.
b. Select Security  Security Chip and press Enter. The Security Chip submenu opens.
c. Ensure that the security chip for TPM 2.0 is set to Active.
d. Press F10 to save the settings and exit.
3. Connect the drive that contains the operating system installation program to the computer.
4. Restart the computer. When the logo screen is displayed, press F1 to enter the UEFI BIOS menu.
5. Select Startup  Boot to display the Boot Priority Order submenu.
6. Select the drive that contains the operating system installation program, for example, USB HDD. Then,
press Esc.
Attention: After you change the startup sequence, ensure that you select the correct device during a
copy, a save, or a format operation. If you select the wrong device, the data on that device might be
erased or overwritten.
7. Select Restart and ensure that OS Optimized Defaults is enabled. Then, press F10 to save the settings
and exit.
8. Follow the on-screen instructions to install the device drivers and necessary programs.
9. After installing the device drivers, apply Windows Update to get the latest updates, for example the
security patches.
Install device drivers
You should download the latest driver for a component when you notice poor performance from that
component or when you added a component. This action might eliminate the driver as the potential cause of
a problem. Download and install the latest driver by one of the following methods:
* Open the Vantage app to check the available update packages. Select the update packages you want,
and then follow the on-screen instructions to download and install the packages.
* Go to https://pcsupport.lenovo.com and select the entry for your computer. Then, follow the on-screen
instructions to download and install necessary drivers and software.

T495s and X395 User Guide

Chapter 7. CRU replacement
What are CRUs
Customer Replaceable Units (CRUs) are parts that can be upgraded or replaced by the customer. The
computers contain the following types of CRUs:
* Self-service CRUs: Refer to parts that can be installed or replaced easily by customer themselves or by
trained service technicians at an additional cost.
* Optional-service CRUs: Refer to parts that can be installed or replaced by customers with a greater skill
level. Trained service technicians can also provide service to install or replace the parts under the type of
warranty designated for the customer's machine.
If you intend on installing a CRU, Lenovo will ship the CRU to you. CRU information and replacement
instructions are shipped with your product and are available from Lenovo at any time upon request. You
might be required to return the defective part that is replaced by the CRU. When return is required: (1) return
instructions, a prepaid shipping label, and a container will be included with the replacement CRU; and (2) you
might be charged for the replacement CRU if Lenovo does not receive the defective CRU within thirty (30)
days of your receipt of the replacement CRU. For full details, see the Lenovo Limited Warranty
documentation at https://www.lenovo.com/warranty/llw_02.
Refer to the following CRU list for your computer.
Self-service CRUs
* ac power adapter
* Always On USB 3.1 connector Gen 1 board cable (hereafter referred to as USB cable)
* Base cover assembly
* M.2 solid-state drive
* Nano-SIM-card and microSD-card tray
* Power cord
* Pointing-stick nonslip cap
* Wireless-WAN card*
Optional-service CRU
* Wireless-LAN card
Note: The wireless-LAN card in your computer is preinstalled by Lenovo, and you are prohibited from
replacing it with another wireless module or removing it. If the device requires replacement due to some
problem during warranty, it must be serviced by a Lenovo authorized service personnel.
* for selected models

Disable Fast Startup and the built-in battery
Before replacing any CRU, ensure that you disable Fast Startup first and then disable the built-in battery.
To disable Fast Startup:
1. Go to Control Panel and view by Large icons or Small icons.

2. Click Power Options, and then click Choose what the power buttons do on the left pane.
3. Click Change settings that are currently unavailable at the top.
4. If prompted by User Account Control (UAC), click Yes.
5. Clear the Turn on fast startup check box, and then click Save changes.
To disable the built-in battery:
1. Restart your computer. When the logo screen is displayed, immediately press F1 to enter the UEFI BIOS
menu.
2. Select Config  Power. The Power submenu is displayed.
3. Select Disable Built-in Battery and press Enter.
4. Select Yes in the Setup Confirmation window. The built-in battery is disabled and the computer turns off
automatically. Wait three to five minutes to let the computer cool.

Replace a CRU
Follow the replacement procedure to replace a CRU.

Base cover assembly
Prerequisite
Before you start, read Appendix A "Important safety information" on page 65 and print the following
instructions.
Note: There might be a risk of short circuits if you remove the base cover assembly when your computer is
connected to ac power.
Replacement procedure
1. Disable the built-in battery. See "Disable Fast Startup and the built-in battery" on page 49.
2. Turn off the computer and disconnect the computer from ac power and all connected cables.
3. Close the computer display and turn the computer over.

T495s and X395 User Guide

4. Loosen the screws that secure the base cover assembly 1 . Push the base cover assembly forward as
shown 2 , and then remove the base cover assembly 3 .

5. Install a new base cover assembly in place 1 . Press the left and right sides of the base cover assembly
as shown 2 , and then tighten the screws in ascending alphabetical order (a to e) as illustrated 3 .

6. Turn the computer over. Connect the ac power adapter and all disconnected cables to the computer.
Troubleshooting
If the computer does not start up after you reinstall the base cover assembly, disconnect the ac power
adapter and then reconnect it to the computer.

Wireless-WAN (for selected models)
The following information is only for the computer with user-installable modules. Ensure that you use only a
Lenovo-authorized wireless module specifically tested for this computer model. Otherwise, the computer will
generate an error-code beep sequence when you turn on the computer.

Chapter 7. CRU replacement

Prerequisite
Before you start, read Appendix A "Important safety information" on page 65 and print the following
instructions.
Attention: Do not touch the contact edge of the wireless-WAN card. Otherwise, the wireless-WAN card
might get damaged.
Replacement procedure
1. Disable the built-in battery. See "Disable Fast Startup and the built-in battery" on page 49.
2. Turn off the computer and disconnect the computer from ac power and all connected cables.
3. Close the computer display and turn the computer over.
4. Remove the base cover assembly. See "Base cover assembly" on page 50.
5. Remove the wireless-WAN card by doing the following:
Note: A Mylar film might cover the wireless-WAN card. To access the wireless-WAN card, peel off the
film first.
a. Hold the cable connector with your fingers and gently disconnect each cable from the wireless-WAN
card 1 . Then, remove the screw that secures the wireless-WAN card 2 . The card is released from
the secured position and pivots upward.
b. Carefully remove the wireless-WAN card out of the slot 3 .

T495s and X395 User Guide

6. Install a new wireless-WAN card by doing the following:
a. Align the contact edge of the new wireless-WAN card with the key in the slot. Then, carefully insert
the card into the slot at an angle of about 20 degrees 1 . Pivot the card downward 2 .
b. Install the screw to secure the wireless-WAN card in place 3 . Connect the antenna cables to the
card 4 . Ensure that you connect the orange cable to the main connector on the card, and the blue
cable to the auxiliary connector on the card.

7. Reinstall the base cover assembly.
8. Turn the computer over. Connect the ac power adapter and all disconnected cables to the computer.

M.2 solid-state drive
Prerequisite
Before you start, read Appendix A "Important safety information" on page 65 and print the following
instructions.
Attention: If you replace a M.2 solid-state drive, you might need to install a new operating system. For
details on how to install a new operating system, see "Install a Windows operating system and drivers" on
page 47.
The M.2 solid-state drive is sensitive. Inappropriate handling might cause damage and permanent loss of
data.
When handling the M.2 solid-state drive, observe the following guidelines:
* Replace the M.2 solid-state drive only for upgrade or repair. The M.2 solid-state drive is not designed for
frequent changes or replacement.
* Before replacing the M.2 solid-state drive, make a backup copy of all the data that you want to keep.
* Do not apply pressure to the M.2 solid-state drive.
* Do not touch the contact edge or circuit board of the M.2 solid-state drive. Otherwise, the M.2 solid-state
drive might get damaged.

Chapter 7. CRU replacement

* Do not make the M.2 solid-state drive subject to physical shocks or vibration. Put the M.2 solid-state drive
on a soft material, such as cloth, to absorb physical shocks.
Replacement procedure
1. Disable the built-in battery. See "Disable Fast Startup and the built-in battery" on page 49.
2. Turn off the computer and disconnect the computer from ac power and all connected cables.
3. Close the computer display and turn the computer over.
4. Remove the base cover assembly. See "Base cover assembly" on page 50.
5. Remove the screw that secures the M.2 solid-state drive 1 . Then, remove the drive out of the slot 2 .

T495s and X395 User Guide

6. Install a new M.2 solid-state drive by doing the following:
a. Align the contact edge of the new M.2 solid-state drive with the key in the slot. Then, carefully insert
the drive into the slot at an angle of about 20 degrees 1 .
b. Pivot the M.2 solid-state drive downward 2 .
c. Install the screw to secure the M.2 solid-state drive 3 .

7. Reinstall the base cover assembly.
8. Turn the computer over. Connect the ac power adapter and all disconnected cables to the computer.

Always On USB 3.1 connector Gen 1 board cable
Prerequisite
Before you start, read Appendix A "Important safety information" on page 65 and print the following
instructions.
Replacement procedure
1. Disable the built-in battery. See "Disable Fast Startup and the built-in battery" on page 49.
2. Turn off the computer and disconnect the computer from ac power and all connected cables.
3. Close the computer display and turn the computer over.
4. Remove the base cover assembly. See "Base cover assembly" on page 50.

Chapter 7. CRU replacement

5. Disconnect the USB cable connectors from the USB board and the system board respectively, and then
remove the USB cable.

6. Install a new USB cable in place, and then connect the USB cable connectors to the USB board and the
system board respectively.

7. Reinstall the base cover assembly.
8. Connect the ac power adapter and all disconnected cables to the computer.

T495s and X395 User Guide

Chapter 8. Help and support
Frequently asked questions
How do I access Control Panel?

Type Control Panel in the Windows search box and then press Enter.

How do I turn off my computer?

Open the Start menu and click

How do I partition my storage
drive?

https://support.lenovo.com/solutions/ht503851

Power. Then, click Shut down.

1. Press and hold the power button until the computer turns off. Then, restart
the computer.
2. If step 1 does not work:

What do I do if my computer
stops responding.

* For models with an emergency reset hole: Insert a straightened paper clip
into the emergency reset hole to cut off power supply temporarily. Then,
restart the computer with ac power connected.
* For models without an emergency reset hole:
- For models with the removable battery, remove the removable battery
and disconnect all power sources. Then, reconnect to ac power and
restart the computer.
- For models with the built-in battery, disconnect all power sources.
Press and hold the power button for about seven seconds. Then,
reconnect to ac power and restart the computer.
1. Carefully unplug the ac power adapter and turn off the computer immediately.
The more quickly you stop the current from passing through the computer the
more likely you will reduce damage from short circuits.

What do I do if I spill liquid on the
computer?

Attention: Although you might lose some data or work by turning off the
computer immediately, leaving the computer on might make your computer
unusable.
2. Do not try to drain out the liquid by turning over the computer. If your
computer has keyboard drainage holes on the bottom, the liquid will be
drained out through the holes.
3. Wait until you are certain that all the liquid is dry before turning on your
computer.

How do I enter the UEFI BIOS
menu?
Where can I get the latest device
drivers and UEFI BIOS?

Restart the computer. When the logo screen is displayed, press F1 to enter the
UEFI BIOS menu.
* From the Vantage app. See "Install a Windows operating system and drivers"
on page 47 and "Update UEFI BIOS" on page 46.
* Download from Lenovo Support Web site at https://pcsupport.lenovo.com.

Error messages
If you see a message that is not included in the following table, record the error message first, then shut
down the computer and call Lenovo for help. See "Lenovo Customer Support Center" on page 62.
Message

Solution

0190: Critical low-battery error

The computer turned off because the battery power is low. Connect the ac power
adapter to the computer and charge the batteries.

0191: System Security - Invalid
remote change requested

The system configuration change has failed. Confirm the operation and try again.

0199: System Security - Security
password retry count exceeded.

This message is displayed when you enter a wrong supervisor password more
than three times. Confirm the supervisor password and try again.

0271: Check Date and Time
settings.

The date or the time is not set in the computer. Enter the UEFI BIOS menu and set
the date and time.

210x/211x: Detection/Read error
on HDDx/SSDx

The storage drive is not working. Reinstall the storage drive. If the problem still
exists, replace the storage drive.
Note:
This error indicates that the operating system or programs cannot create, modify,
or delete data in the non-volatile system UEFI variable storage due to insufficient
storage space after POST.

Error: The non-volatile system
UEFI variable storage is nearly
full.

The non-volatile system UEFI variable storage is used by the UEFI BIOS and by
the operating system or programs. This error occurs when the operating system
or programs store large amounts of data in the variable storage. All data needed
for POST, such as UEFI BIOS setup settings, chipset, or platform configuration
data, are stored in a separate UEFI variable storage.
Press F1 after the error message is displayed to enter the UEFI BIOS menu. A
dialog asks for confirmation to clean up the storage. If you select "Yes", all data
that were created by the operating system or programs will be deleted except
global variables defined by the Unified Extensible Firmware Interface
Specification. If you select "No", all data will be kept, but the operating system or
programs will not be able to create, modify, or delete data in the storage.
If this error happens at a service center, Lenovo authorized service personnel will
clean up the non-volatile system UEFI variable storage using the preceding
solution.

Fan error. Press Esc to startup
with limited performance.

T495s and X395 User Guide

The thermal fan might not work correctly. After the error message is displayed,
press Esc within five seconds to start up the computer with limited performance.
Otherwise, the computer will shut down immediately. If the problem still exists
when you starts up next time, have your computer serviced.

Beep errors
Lenovo SmartBeep technology enables you to decode beep errors with your smartphone when a black
screen occurs with beeps from your computer. To decode the beep error with Lenovo SmartBeep
technology:
1. Go to https://support.lenovo.com/smartbeep or scan the following QR Code.

2. Download the proper diagnostic app and install it on your smartphone.
3. Run the diagnostic app and place the smartphone near the computer.
4. Press Fn on your computer to emit the beep again. The diagnostic app decodes the beep error and
shows possible solutions on the smartphone.
Note: Do not attempt to service a product yourself unless instructed to do so by the Customer Support
Center or product documentation. Only use a Lenovo-authorized service provider to repair your product.

Chapter 8. Help and support

Self-help resources
Use the following self-help resources to learn more about the computer and troubleshoot problems.
Resources
Troubleshooting and FAQ

How to access?
* https://www.lenovo.com/tips
* https://forums.lenovo.com

Accessibility information

https://www.lenovo.com/accessibility

* Use Lenovo recovery options.
1. Go to https://support.lenovo.com/
HowToCreateLenovoRecovery.
2. Follow the on-screen instructions.
Reset or restore Windows

* Use Windows recovery options.
1. Go to https://pcsupport.lenovo.com.
2. Detect your computer or manually select your
computer model.
3. Click Diagnostics  Operating System
Diagnostics and then follow the on-screen
instructions.

Use the Vantage app to:
* Configure device settings.
* Download and install UEFI BIOS, drivers, and firmware
updates.
* Secure your computer from outside threats.

Type Vantage in the Windows search box and then press
Enter.

* Diagnose hardware problems.
* Check the computer warranty status.
* Access User Guide and helpful articles.
Product documentation:
* Safety and Warranty Guide
* Setup Guide
* This User Guide

Go to https://pcsupport.lenovo.com. Then, follow the onscreen instructions to filter out the documentation you
want.

* Regulatory Notice
Lenovo Support Web site with the latest support
information of the following:
* Drivers and software
* Diagnostic solutions

https://pcsupport.lenovo.com

* Product and service warranty
* Product and parts details
* Knowledge base and frequently asked questions
* Open the Start menu and click Get Help or Tips.
Windows help information

* Use Windows Search or the Cortana(R) personal
assistant.
* Microsoft support Web site: https://
support.microsoft.com

T495s and X395 User Guide

Call Lenovo
If you have tried to correct the problem yourself and still need help, you can call Lenovo Customer Support
Center.

Before you contact Lenovo
Prepare the following before you contact Lenovo:
1. Record the problem symptoms and details:
* What is the problem? Is it continuous or intermittent?
* Any error message or error code?
* What operating system are you using? Which version?
* Which software applications were running at the time of the problem?
* Can the problem be reproduced? If so, how?
2. Record the system information:
* Product name
* Machine type and serial number
The following illustration shows where to find the machine type and serial number of your computer.
ThinkPad T495s

Chapter 8. Help and support

ThinkPad X395

Lenovo Customer Support Center
During the warranty period, you can call Lenovo Customer Support Center for help.
Telephone numbers
For a list of the Lenovo Support phone numbers for your country or region, go to https://
pcsupport.lenovo.com/supportphonelist for the latest phone numbers.
Note: Phone numbers are subject to change without notice. If the number for your country or region is not
provided, contact your Lenovo reseller or Lenovo marketing representative.
Services available during the warranty period
* Problem determination - Trained personnel are available to assist you with determining if you have a
hardware problem and deciding what action is necessary to fix the problem.
* Lenovo hardware repair - If the problem is determined to be caused by Lenovo hardware under warranty,
trained service personnel are available to provide the applicable level of service.
* Engineering change management - Occasionally, there might be changes that are required after a product
has been sold. Lenovo or your reseller, if authorized by Lenovo, will make selected Engineering Changes
(ECs) that apply to your hardware available.
Services not covered
*
*
*
*
*
*

Replacement or use of parts not manufactured for or by Lenovo or nonwarranted parts
Identification of software problem sources
Configuration of UEFI BIOS as part of an installation or upgrade
Changes, modifications, or upgrades to device drivers
Installation and maintenance of network operating systems (NOS)
Installation and maintenance of programs

For the terms and conditions of the Lenovo Limited Warranty that apply to your Lenovo hardware product,
go to:
* https://www.lenovo.com/warranty/llw_02

T495s and X395 User Guide

* https://pcsupport.lenovo.com/warrantylookup

Purchase additional services
During and after the warranty period, you can purchase additional services from Lenovo at https://
pcsupport.lenovo.com/warrantyupgrade.
Service availability and service name might vary by country or region.

Chapter 8. Help and support

T495s and X395 User Guide

Appendix A. Important safety information
Safety notices
This information can help you safely use your computer. Follow and retain all information included with your
computer. The information in this document does not alter the terms of your purchase agreement or the
Limited Warranty. For more information, see Safety and Warranty Guide that comes with your computer.
Customer safety is important. Our products are developed to be safe and effective. However, personal
computers are electronic devices. Power cords, power adapters, and other features can create potential
safety risks that can result in physical injury or property damage, especially if misused. To reduce these risks,
follow the instructions included with your product, observe all warnings on the product and in the operating
instructions, and review the information included in this document carefully. By carefully following the
information contained in this document and provided with your product, you can help protect yourself from
hazards and create a safer computer work environment.
Note: This information includes references to power adapters and batteries. In addition, some products
(such as speakers and monitors) ship with external power adapters. If you have such a product, this
information applies to your product. In addition, computer products contain a coin-sized internal battery that
provides power to the system clock even when the computer is unplugged, so the battery safety information
applies to all computer products.

Important information about using your computer
Ensure that you follow the important tips given here to get the most use and enjoyment out of your computer.
Failure to do so might lead to discomfort or injury, or cause the computer to fail.
Protect yourself from the heat that your computer generates.
When your computer is turned on or the battery is charging, the base,
the palm rest, and some other parts may become hot. The
temperature they reach depends on the amount of system activity and
the level of charge in the battery.
Extended contact with your body, even through clothing, could cause
discomfort or even a skin burn.
* Avoid keeping your hands, your lap, or any other part of your body
in contact with a hot section of the computer for any extended
time.
* Periodically take your hands away from the keyboard by lifting your
hands from the palm rest.

Protect yourself from the heat generated by the ac power adapter.
When the ac power adapter is connected to an electrical outlet and
your computer, it generates heat.
Extended contact with your body, even through clothing, may cause a
skin burn.
* Do not place the ac power adapter in contact with any part of your
body while it is in use.
* Never use it to warm your body.
* Do not wrap the cords around the ac power adapter while in use.

Prevent your computer from getting wet.

To avoid spills and the danger of electrical shock, keep liquids away
from your computer.

Protect the cables from being damaged.

Applying strong force to cables may damage or break them.
Route communication lines, or the cables of an ac power adapter, a
mouse, a keyboard, a printer, or any other electronic device, so that
they cannot be walked on, tripped over, pinched by your computer or
other objects, or in any way subject to treatment that could interfere
with the operation of your computer.

Protect your computer and data when moving it.
Before moving a computer equipped with a storage drive, do one of
the following:
* Turn it off.
* Put it in sleep mode.
* Put it in hibernation mode.
This helps to prevent damage to the computer, and possible loss of
data.

T495s and X395 User Guide

Handle your computer gently.

Do not drop, bump, scratch, twist, hit, vibrate, push, or place heavy
objects on your computer, display, or external devices.

Carry your computer carefully.

* Use a quality carrying case that provides adequate cushioning and
protection.
* Do not pack your computer in a tightly packed suitcase or bag.
* Before putting your computer in a carrying case, make sure that it
is off, in sleep mode, or in hibernation mode. Do not put a
computer in a carrying case while it is turned on.

Conditions that require immediate action
Products can become damaged due to misuse or neglect. Some product damage is serious enough
that the product should not be used again until it has been inspected and, if necessary, repaired by an
authorized servicer.
As with any electronic device, pay close attention to the product when it is turned on.
On very rare occasions, you might notice an odor or see a puff of smoke or sparks vent from your
product. You might also hear sounds like popping, cracking, or hissing. These might merely mean that
an internal electronic component has failed in a safe and controlled manner. Or, they might indicate a
potential safety issue. Do not take risks or attempt to diagnose the situation yourself. Contact the
Customer Support Center for further guidance. For a list of Service and Support phone numbers, see
the following Web site:
https://support.lenovo.com/supportphonelist

Frequently inspect your computer and its components for damage, wear, or signs of danger. If you
have any question about the condition of a component, do not use the product. Contact the Customer
Support Center or the product manufacturer for instructions on how to inspect the product and have it
repaired, if necessary.
In the unlikely event that you notice any of the following conditions, or if you have any safety concerns
with your product, stop using the product and unplug it from the power source and
telecommunication lines until you can speak to the Customer Support Center for further guidance.

Appendix A. Important safety information

* Power cords, plugs, power adapters, extension cords, surge protectors, or power supplies that are
cracked, broken, or damaged.
* Signs of overheating, smoke, sparks, or fire.
* Damage to a battery (such as cracks, dents, or creases), discharge from a battery, or a buildup of foreign
substances on the battery.
* A cracking, hissing, or popping sound, or strong odor that comes from the product.
* Signs that liquid has been spilled or an object has fallen onto the computer product, the power cord, or
power adapter.
* The computer product, power cord, or power adapter has been exposed to water.
* The product has been dropped or damaged in any way.
* The product does not operate normally when you follow the operating instructions.
Note: If you notice these conditions with a product (such as an extension cord) that is not manufactured for
or by Lenovo, stop using that product until you can contact the product manufacturer for further instructions,
or until you get a suitable replacement.

Service
Do not attempt to service a product yourself unless instructed to do so by the Customer Support Center or
your documentation. Only use a Service Provider who is approved to repair your particular product.
Note: Replacement parts approved for customer installation are referred to as Customer Replaceable Units,
or CRUs. Lenovo provides documentation with instructions when it is appropriate for customers to replace
CRUs. You must closely follow all instructions when replacing parts. The Off state of a power indicator does
not necessarily mean that voltage levels inside a product are zero. Before you remove the covers from a
product equipped with a power cord, always ensure that the power is turned off and that the product is
unplugged from any power source. If you have any questions or concerns, contact the Customer Support
Center.
Although there are no moving parts in your computer after the power cord has been disconnected, the
following warnings are required for your safety.

Keep fingers and other parts of your body away from hazardous, moving parts. If you suffer an injury, seek
medical care immediately.

Do not touch hot surface of hot components inside the computer. During operation, some components
become hot enough to burn the skin. Before you open the computer cover, turn off the computer, disconnect
power, and wait approximately 10 minutes for the components to cool.

After replacing a CRU, reinstall all protective covers, including the computer cover, before connecting power
and operating the computer. This action is important to help prevent unexpected electrical shock and help
ensure the containment of an unexpected fire that could happen under extremely rare conditions.

T495s and X395 User Guide

When replacing CRUs, be cautious of sharp edges or corners that might cause injury. If you suffer an injury,
seek medical care immediately.

Power cords and power adapters
DANGER
Use only the power cords and power adapters supplied by the product manufacturer.
The power cords shall be safety approved. For Germany, it shall be H03VV-F, 3G, 0.75 mm2, or
better. For other countries, the suitable types shall be used accordingly.
Never wrap a power cord around a power adapter or other object. Doing so can stress the cord in
ways that can cause the cord to fray, crack, or crimp. This can present a safety hazard.
Always route power cords so that they will not be walked on, tripped over, or pinched by objects.
Protect power cords and power adapters from liquids. For instance, do not leave your power cord
or power adapter near sinks, tubs, toilets, or on floors that are cleaned with liquid cleansers. Liquids
can cause a short circuit, particularly if the power cord or power adapter has been stressed by
misuse. Liquids also can cause gradual corrosion of power cord terminals and/or the connector
terminals on a power adapter, which can eventually result in overheating.
Ensure that all power cord connectors are securely and completely plugged into receptacles.
Do not use any power adapter that shows corrosion at the ac input pins or shows signs of
overheating (such as deformed plastic) at the ac input pins or anywhere on the power adapter.
Do not use any power cords where the electrical contacts on either end show signs of corrosion or
overheating or where the power cord appears to have been damaged in any way.
To prevent possible overheating, do not cover the power adapter with clothing or other objects
when the power adapter is plugged into an electrical outlet.

Extension cords and related devices
Ensure that extension cords, surge protectors, uninterruptible power supplies, and power strips that you use
are rated to handle the electrical requirements of the product. Never overload these devices. If power strips
are used, the load should not exceed the power strip input rating. Consult an electrician for more information
if you have questions about power loads, power requirements, and input ratings.

Appendix A. Important safety information

Plugs and outlets
DANGER
If a receptacle (power outlet) that you intend to use with your computer equipment appears to be
damaged or corroded, do not use the outlet until it is replaced by a qualified electrician.
Do not bend or modify the plug. If the plug is damaged, contact the manufacturer to obtain a
replacement.
Do not share an electrical outlet with other home or commercial appliances that draw large
amounts of electricity; otherwise, unstable voltage might damage your computer, data, or attached
devices.
Some products are equipped with a three-pronged plug. This plug fits only into a grounded
electrical outlet. This is a safety feature. Do not defeat this safety feature by trying to insert it into a
non-grounded outlet. If you cannot insert the plug into the outlet, contact an electrician for an
approved outlet adapter or to replace the outlet with one that enables this safety feature. Never
overload an electrical outlet. The overall system load should not exceed 80 percent of the branch
circuit rating. Consult an electrician for more information if you have questions about power loads
and branch circuit ratings.
Be sure that the power outlet you are using is properly wired, easily accessible, and located close to
the equipment. Do not fully extend power cords in a way that will stress the cords.
Be sure that the power outlet provides the correct voltage and current for the product you are
installing.
Carefully connect and disconnect the equipment from the electrical outlet.

Power supply statement
Never remove the cover on a power supply or any part that has the following label attached.

Hazardous voltage, current, and energy levels are present inside any component that has this label attached.
There are no serviceable parts inside these components. If you suspect a problem with one of these parts,
contact a service technician.

External devices
CAUTION:
Do not connect or disconnect any external device cables other than Universal Serial Bus (USB) and
1394 cables while the computer power is on; otherwise, you might damage your computer. To avoid
possible damage to attached devices, wait at least five seconds after the computer is shut down to
disconnect external devices.

T495s and X395 User Guide

General battery notice
DANGER
Batteries supplied by Lenovo for use with your product have been tested for compatibility and
should only be replaced with approved parts. A battery other than the one specified by Lenovo, or a
disassembled or modified battery is not covered by the warranty.
Battery abuse or mishandling can cause overheat, liquid leakage, or an explosion. To avoid possible
injury:
* Do not open, dissemble, or service any battery.
* Do not crush or puncture the battery.
* Do not short-circuit the battery, or expose it to water or other liquids.
* Keep the battery away from children.
* Keep the battery away from fire.
Stop using the battery if it is damaged, or if you notice any discharge or the buildup of foreign
materials on the battery leads.
Store the rechargeable batteries or products containing the rechargeable batteries at room
temperature, charged to approximately 30 to 50% of capacity. We recommend that the batteries be
charged about once per year to prevent overdischarge.
Do not put the battery in trash that is disposed of in landfills. When disposing of the battery, comply
with local ordinances or regulations.

Notice for built-in rechargeable battery
DANGER
Do not attempt to remove or replace the built-in rechargeable battery. Replacement of the battery
must be done by a Lenovo-authorized repair facility or technician.
Only recharge the battery strictly according to instructions included in the product documentation.
The Lenovo-authorized repair facilities or technicians recycle Lenovo batteries according to local
laws and regulations.

Lithium coin-cell battery notice
DANGER
Danger of explosion if battery is incorrectly replaced.
If the coin-cell battery is not a CRU, do not attempt to replace the coin-cell battery. Replacement of
the battery must be done by a Lenovo-authorized repair facility or technician.

Appendix A. Important safety information

The Lenovo-authorized repair facilities or technicians recycle Lenovo batteries according to local
laws and regulations.

When replacing the lithium coin-cell battery, use only the same type or equivalent type that is recommended
by the manufacturer. The battery contains lithium and can explode if not properly used, handled, or disposed
of. Swallowing the lithium coin-cell battery will cause chocking or severe internal burns in just two hours and
might even result in death.
Keep batteries away from children. If the lithium coin-cell battery is swallowed or placed inside any part of
the body, seek medical care immediately.
Do not:
* Throw or immerse into water
* Heat to more than 100 C (212F)
* Repair or disassemble
* Leave in an extremely low air pressure environment
* Leave in an extremely high-temperature environment
* Crush, puncture, cut, or incinerate
Dispose of the battery as required by local ordinances or regulations.
The following statement applies to users in the state of California, U.S.A.
California Perchlorate Information:
Products containing manganese dioxide lithium coin-cell batteries may contain perchlorate.
Perchlorate Material - special handling may apply, see https://www.dtsc.ca.gov/hazardouswaste/
perchlorate/.

T495s and X395 User Guide

Heat and product ventilation
DANGER
Computers, ac power adapters, and many accessories can generate heat when turned on and when
batteries are charging. Notebook computers can generate a significant amount of heat due to their
compact size. Always follow these basic precautions:
* When your computer is turned on or the battery is charging, the base, the palm rest, and some
other parts may become hot. Avoid keeping your hands, your lap, or any other part of your body
in contact with a hot section of the computer for any extended length of time. When you use the
keyboard, avoid keeping your palms on the palm rest for a prolonged period of time. Your
computer generates some heat during normal operation. The amount of heat depends on the
amount of system activity and the battery charge level. Extended contact with your body, even
through clothing, could cause discomfort or even a skin burn. Periodically take breaks from using
the keyboard by lifting your hands from the palm rest; and be careful not to use the keyboard for
any extended length of time.
* Do not operate your computer or charge the battery near flammable materials or in explosive
environments.
* Ventilation slots, fans and/or heat sinks are provided with the product for safety, comfort, and
reliable operation. These features might inadvertently become blocked by placing the product on
a bed, sofa, carpet, or other flexible surface. Never block, cover, or disable these features.
* When the ac power adapter is connected to an electrical outlet and your computer, it generates
heat. Do not place the adapter in contact with any part of your body while using it. Never use the
ac power adapter to warm your body. Extended contact with your body, even through clothing,
may cause a skin burn.
For your safety, always follow these basic precautions with your computer:
* Keep the cover closed whenever the computer is plugged in.
* Regularly inspect the outside of the computer for dust accumulation.
* Remove dust from vents and any perforations in the bezel. More frequent cleanings might be
required for computers in dusty or high-traffic areas.
* Do not restrict or block any ventilation openings.
* Do not operate your computer inside furniture, as this might increase the risk of overheating.
* Airflow temperatures into the computer should not exceed 35C (95F).

Appendix A. Important safety information

Electrical current safety information
DANGER
Electric current from power, telephone, and communication cables is hazardous.
To avoid a shock hazard:
* Do not use your computer during a lightning storm.
* Do not connect or disconnect any cables or perform installation, maintenance, or reconfiguration
of this product during an electrical storm.
* Connect all power cords to a properly wired and grounded electrical outlet.
* Connect properly wired outlets to any equipment that will be attached to this product.
* Whenever possible, use one hand only to connect or disconnect signal cables.
* Never turn on any equipment when there is evidence of fire, water, or structural damage.
* Disconnect the attached power cords, battery, and all the cables before you open the device
covers, unless instructed otherwise in the installation and configuration procedures.
* Do not use your computer until all internal parts enclosures are fastened into place. Never use
the computer when internal parts and circuits are exposed.

DANGER
Connect and disconnect cables as described in the following procedures when installing, moving,
or opening covers on this product or attached devices.
To connect:

To disconnect:

1. Turn everything OFF.

2. First, attach all cables to devices.

2. First, remove power cords from outlets.

3. Attach signal cables to connectors.

3. Remove signal cables from connectors.

4. Attach power cords to outlets.

4. Remove all cables from devices.

5. Turn devices ON.
The power cord must be disconnected from the wall outlet or receptacle before installing all other electrical
cables connected to the computer.
The power cord may be reconnected to the wall outlet or receptacle only after all other electrical cables have
been connected to the computer.

DANGER
During electrical storms, do not perform any replacement and do not connect the telephone cable
to or disconnect it from the telephone outlet on the wall.

T495s and X395 User Guide

Liquid crystal display (LCD) notice
CAUTION:
The liquid crystal display (LCD) is made of glass, and rough handling or dropping the computer can
cause the LCD to break. If the LCD breaks and the internal fluid gets into your eyes or on your hands,
immediately wash the affected areas with water for at least 15 minutes; if any symptoms are present
after washing, get medical care.
Note: For products with mercury-containing fluorescent lamps (for example, non-LED), the fluorescent lamp
in the liquid crystal display (LCD) contains mercury; dispose of according to local, state, or federal laws.

Use earphones, headphones, or a headset

Excessive sound pressure from earphones and headphones can cause hearing loss. Adjustment of the
equalizer to maximum increases the earphone and headphone output voltage and the sound pressure level.
Therefore, to protect your hearing, adjust the equalizer to an appropriate level.
Excessive use of headphones or earphones for a long period of time at high volume can be dangerous if the
output of the headphone or earphone connectors do not comply with specifications of EN 50332-2. The
headphone output connector of your computer complies with EN 50332-2 Sub clause 7. This specification
limits the computer's maximum wide band true RMS output voltage to 150 mV. To help protect against
hearing loss, ensure that the headphones or earphones you use also comply with EN 50332-2 (Clause 7
limits) for a wide band characteristic voltage of 75 mV. Using headphones that do not comply with EN 503322 can be dangerous due to excessive sound pressure levels.
If your Lenovo computer came with headphones or earphones in the packaging, as a set, the combination of
the headphones or earphones and the computer already complies with the specifications of EN 50332-1. If
different headphones or earphones are used, ensure that they comply with EN 50332-1 (Clause 6.5
Limitation Values). Using headphones that do not comply with EN 50332-1 can be dangerous due to
excessive sound pressure levels.

Choking hazard notice

CHOKING HAZARD - Product contains small parts.
Keep away from children under three years.

Plastic bag notice
DANGER
Plastic bags can be dangerous. Keep plastic bags away from babies and children to avoid danger of
suffocation.

Appendix A. Important safety information

Glass parts notice
CAUTION:
Some parts of your product may be made of glass. This glass could break if the product is dropped on
a hard surface or receives a substantial impact. If glass breaks, do not touch or attempt to remove it.
Stop using your product until the glass is replaced by trained service personnel.

Static electricity prevention
Static electricity, although harmless to you, can seriously damage computer components and options.
Improper handling of static-sensitive parts can damage the part. When you unpack an option or CRU, do not
open the static-protective package containing the part until the instructions direct you to install it.
When you handle options or CRUs, or perform any work inside the computer, take the following precautions
to avoid static-electricity damage:
* Limit your movement. Movement can cause static electricity to build up around you.
* Always handle components carefully. Handle adapters, memory modules, and other circuit boards by the
edges. Never touch exposed circuitry.
* Prevent others from touching components.
* When you install a static-sensitive option or CRU, touch the static-protective packaging containing the
part to a metal expansion-slot cover or other unpainted metal surface on the computer for at least two
seconds. This reduces static electricity in the package and your body.
* When possible, remove the static-sensitive part from the static-protective packaging and install the part
without setting it down. When this is not possible, place the static-protective packaging on a smooth, level
surface and place the part on it.
* Do not place the part on the computer cover or other metal surface.

Operating environment
Maximum altitude (without pressurization)
3048 m (10 000 ft)
Temperature
* Operating: 5C to 35C (41F to 95F)
* Storage and transportation in original shipping packaging: -20C to 60C (-4F to 140F)
* Storage without packaging: 5C to 43C (41F to 109F)
Note: When you charge the battery, its temperature must be no lower than 10C (50F).
Relative humidity
* Operating: 8% to 95% at wet-bulb temperature 23C (73F)
* Storage and transportation: 5% to 95% at wet-bulb temperature 27C (81F)

Cleaning and maintenance
With appropriate care and maintenance, your computer will serve you reliably. The following topics offer
information to help you keep your computer working with best performance.

T495s and X395 User Guide

Basic maintenance tips
Here are some basic points about keeping your computer functioning properly:
* If possible, place your computer in a well-ventilated and dry area without direct exposure to sunshine.
* Store packing materials safely out of the reach of children to prevent the risk of suffocation from plastic
bags.
* Keep your computer away from magnets, activated cellular phones, electrical appliances, or speakers
(more than 13 cm or 5 inches).
* Avoid subjecting your computer to extreme temperatures (below 5C/41F or above 35C/95F).
* Avoid placing any objects (including paper) between the display and the keyboard or the palm rest.
* Computer display might be designed to be opened and used at a certain angle. Do not open the display
with force. Otherwise, the computer hinge might get damaged.
* Do not turn your computer over when the ac power adapter is plugged in, otherwise, it could break the
adapter plug.
* Before moving your computer, be sure to remove any media, turn off attached devices, and disconnect
cords and cables.
* When picking up your open computer, hold it by the bottom. Do not pick up or hold your computer by the
display.
* Only an authorized Lenovo repair technician should disassemble and repair your computer.
* Do not modify or tape the latches to keep the display open or closed.
* Avoid directly exposing your computer and peripherals to the air from an appliance that can produce
negative ions. Wherever possible, ground your computer to facilitate safe electrostatic discharge.
Clean your computer
It is a good practice to clean your computer periodically to protect the surfaces and ensure trouble-free
operation.
Clean the computer cover: Wipe it with a lint-free cloth dampened in mild soap and water. Avoid applying
liquids directly to the cover.
Clean the keyboard: Wipe the keys one by one with a lint-free cloth dampened in mild soap and water. If
you wipe several keys at a time, the cloth might hook onto an adjacent key and possibly damage it. Avoid
spraying cleaner directly onto the keyboard. To remove any crumbs or dust from beneath the keys, you can
use a camera blower with a brush or use cool air from a hair dryer.
Clean the computer screen: Scratches, oil, dust, chemicals, and ultraviolet light can affect the performance
of your computer screen. Use a dry, soft lint-free cloth to wipe the screen gently. If you see a scratchlike
mark on your screen, it might be a stain. Wipe or dust the stain gently with a soft, dry cloth. If the stain
remains, moisten a soft, lint-free cloth with water or eyeglass cleaner, but do not apply liquids directly to your
computer screen. Ensure that the computer screen is dry before closing it.

Appendix A. Important safety information

T495s and X395 User Guide

Appendix B. Accessibility and ergonomic information
This chapter provides information about accessibility and ergonomics.

Accessibility information
Lenovo is committed to providing users who have hearing, vision, and mobility limitations with greater
access to information and technology. You can get the most up-to-date accessibility information from
https://www.lenovo.com/accessibility.
If you need additional support with the accessibility features, go to https://support.lenovo.com/
supportphonelist to find the support phone numbers for your country or region.

Ergonomic information
Good ergonomic practice is important to get the most from your personal computer and to avoid discomfort.
Arrange your workplace and the equipment you use to suit your individual needs and the kind of work that
you perform. In addition, use healthy work habits to maximize your performance and comfort when using
your computer.
Working in the virtual office might mean adapting to frequent changes in your environment. Adapting to the
surrounding light sources, active seating, and the placement of your computer hardware, can help you
improve your performance and achieve greater comfort.
This example shows someone in a conventional setting. Even when not in such a setting, you can follow
many of these tips. Develop good habits, and they will serve you well.

General posture: Make minor modifications in your working posture to deter the onset of discomfort caused
by long periods of working in the same position. Frequent short breaks (at least one 10-minute break every
hour) from your work also help to prevent minor discomfort associated with your working posture. During
these breaks, stand up, move about and stretch your arms, legs, back, neck and shoulders, do eye exercises
to reduce muscle and eye fatigue.
Display: Position the display to maintain a comfortable viewing distance of 510 mm to 760 mm (20 inches to
30 inches). Avoid glare or reflections on the display from overhead lighting or outside sources of light. Keep
the display screen clean and set the brightness to levels that enable you to see the screen clearly. Press the
brightness control keys to adjust display brightness.

Head position: Keep your head and neck in a comfortable and neutral (vertical, or upright) position. To
reduce your risk of tiring your eyes by constantly focusing on your screen, look away from your computer at
least every 20 minutes and gaze at a distant object (at least 20 feet away) for at least 20 seconds.
Chair: Use a chair that gives you good back support and seat height adjustment. Use chair adjustments to
best suit your comfort posture.
Arm and hand position: If available, use chair arm rests or an area on your working surface to provide
weight support for your arms. Keep your forearms, wrists, and hands in a relaxed and neutral (horizontal)
position. Type with a soft touch without pounding the keys.
Leg position: Keep your thighs parallel to the floor and your feet flat on the floor or on a footrest.
What if you are traveling?
It might not be possible to observe the best ergonomic practices when you are using your computer while on
the move or in a casual setting. Regardless of the setting, try to observe as many of the tips as possible.
Sitting properly and using adequate lighting, for example, helps you maintain desirable levels of comfort and
performance. If your work area is not in an office setting, ensure to take special note of employing active
sitting and taking work breaks. Many product solutions are available to help you modify and expand your
computer to best suit your needs. You can find some of these options at https://www.lenovo.com/accessories.
Explore your options for docking solutions and external products that provide the adjustability and features
that you want.
Questions about vision?
The visual display screens of notebook computers are designed to meet the highest standards. These visual
display screens provide you with clear, crisp images and large, bright displays that are easy to see, yet easy
on the eyes. Any concentrated and sustained visual activity can be tiring. If you have questions on eye
fatigue or visual discomfort, consult a vision-care specialist for advice.
Low Blue Light (for selected models)
Computer display emits blue light. Blue light, also known as high-energy visible (HEV) light, has the shortest
wavelength of visible light (380nm to 500nm), and therefore produces the highest amount of energy.
Prolonged exposure to a blue light may cause temporary visual fatigue. This computer is shipped from the
factory in low blue light mode, this can help to improve visual fatigue.
Night light (Software solution)
Blue light is the high-energy visible light in the light spectrum. Excessive exposure to blue light might damage
your vision. Night light is a feature that reduces the blue light emitted by computer displays. When the night
light is on, your computer display shows warmer colors that help you reduce eye strain.
To turn on or turn off the night light, type Night light in the Windows search box and then press Enter. Then,
follow the on-screen instructions.
Note: Selected Lenovo computers are low blue-light certified. These computers are tested with night light
turned on and color temperature set to the default value of 48 or greater.

T495s and X395 User Guide

Appendix C. Supplemental information about the Linux
operating system
In limited countries or regions, Lenovo offers customers an option to order computers with the preinstalled
Linux(R) operating system.
If the Linux operating system is available on your computer, read the following information before you use the
computer. Ignore any information related to Windows-based programs, utilities, and Lenovo preinstalled
applications in this documentation.
Access the Lenovo Limited Warranty
This product is covered by the terms of the Lenovo Limited Warranty (LLW), version L505-0010-02 08/2011.
You can view the LLW in a number of languages from the following Web site. Read the Lenovo Limited
Warranty at:
https://www.lenovo.com/warranty/llw_02

The LLW also is preinstalled on the computer. To access the LLW:
* for Ubuntu(R), go to /usr/share/doc/lenovo-doc
* for Fedora(R), go to /opt/Lenovo
If you cannot view the LLW either from the Web site or from your computer, contact your local Lenovo office
or reseller to obtain a printed version of the LLW.
Access Linux distributions
Linux is an open-source operating system, and popular Linux distributions include Ubuntu and Fedora.
To learn more about the Ubuntu operating system, go to:
https://www.ubuntu.com

To learn more about the Fedora operating system, go to:
https://getfedora.org/

Get support information
If you need help, service, technical assistance, or more information about the Linux operating system or
other applications, contact the provider of the Linux operating system or the provider of the application. If
you need the service and support for hardware components shipped with your computer, contact Lenovo.
For more information about how to contact Lenovo, refer to the User Guide and Safety and Warranty Guide.
To access the latest User Guide and Safety and Warranty Guide, go to:
https://pcsupport.lenovo.com

T495s and X395 User Guide

Appendix D. Compliance and TCO Certified information
This chapter provides regulatory, environmental, RoHS, and ENERGY STAR information about Lenovo
products.

Radio frequency compliance statements
Computer models equipped with wireless communications comply with the radio frequency and safety
standards of any country or region in which it has been approved for wireless use.
Besides this document, ensure that you read the Regulatory Notice for your country or region before using
the wireless devices contained in your computer.

Wireless-related information
This topic provides wireless-related information about Lenovo products.

Wireless interoperability
Wireless-LAN card is designed to be interoperable with any wireless-LAN product that is based on Direct
Sequence Spread Spectrum (DSSS), Complementary Code Keying (CCK), and/or Orthogonal Frequency
Division Multiplexing (OFDM) radio technology, and is compliant to:
* The 802.11b/g Standard, 802.11a/b/g, 802.11n, 802.11ax, or 802.11ac on wireless-LANs, as defined by
the Institute of Electrical and Electronics Engineers.
* The Wireless Fidelity (Wi-Fi(R)) certification as defined by the Wi-Fi Alliance(R).
Notes:
* Some models may not support 802.11ax, depending on your wireless configurations.
* For some countries or regions, use of 802.11ax may be disabled according to your local regulations.

Usage environment and your health
This computer contains integrated wireless cards that operate within the guidelines identified by radio
frequency (RF) safety standards and recommendations; therefore, Lenovo believes that this product is safe
for use by consumers. These standards and recommendations reflect the consensus of the worldwide
scientific community, and result from deliberations of panels and committees of scientists, who continually
review and interpret the extensive research literature.
In some situations or environments, the use of wireless devices might be restricted by the proprietor of a
building or responsible representatives of an organization. For example, these situations and areas might
include the following:
* On board of airplanes, in hospitals or near petrol stations, blasting areas (with electro-explosive devices),
medical implants or body-worn electronic medical devices, such as pace makers.
* In any other environment where the risk of interference to other devices or services is perceived or
identified as harmful.
If you are uncertain of the policy that applies to the use of wireless devices in a specific area (such as an
airport or hospital), you are encouraged to ask for authorization to use a wireless device prior to turning on
the computer.

Locate the UltraConnect wireless antennas
Your computer has an UltraConnectTM wireless antenna system. You can enable wireless communication
wherever you are.
The following illustration shows the antenna locations on your computer:

1. Wireless-LAN antenna (main)
2. Wireless-WAN antenna (main, for selected models)
3. Wireless-WAN antenna (auxiliary, for selected models)
4. Wireless-LAN antenna (auxiliary)

Locate wireless regulatory notices
For more information about the wireless regulatory notices, refer to the Regulatory Notice at https://
support.lenovo.com.

European Union (EU) / United Kingdom (UK) -- Radio Equipment
Compliance
EU Contact: Lenovo (Slovakia), Landererova 12, 811 09 Bratislava, Slovakia

UK contact: Lenovo, Redwood, Crockford Lane, Basingstoke, RG24 8WQ, UK.

This product is in conformity with all the requirements and essential norms that apply to EU Council Radio
Equipment Directive 2014/53/EU on the approximation of the laws of the Member States, as well as the UK
Radio Equipment Regulations SI 2017 No. 1206, relating to radio equipment.
The full text of the system EU declaration of conformity is available at:
https://www.lenovo.com/us/en/compliance/eu-doc
The full text of the system UK declaration of conformity is available at:
https://www.lenovo.com/us/en/compliance/uk-doc

T495s and X395 User Guide

Lenovo cannot accept responsibility for any failure to satisfy the protection requirements resulting from a
non-recommended modification of the product, including the installation of option cards from other
manufacturers. This product has been tested and found to comply with the limits for Class B equipment
according to European and UK compliance standards. The limits for Class B equipment were derived for
typical residential environments to provide reasonable protection against interference with certified
communication devices.

Brazil
Este equipamento nao tem direito a protecao contra interferencia prejudicial e nao pode causar interferencia
em sistemas devidamente autorizados.
This equipment is not protected against harmful interference and may not cause interference with duly
authorized systems.

Mexico
Advertencia: En Mexico la operacion de este equipo esta sujeta a las siguientes dos condiciones: (1) es
posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe
aceptar cualquier interferencia, incluyendo la que pueda causar su operacion no deseada.

Singapore

Korea radio frequency compliance statement
   ( 24002483.5 , 57255825 )
          
SAR 
      .
    .          
 .        SAR     . SAR 
           .      20mm
    .

Environmental information of countries and regions
This section provides environmental, recycling, and RoHS information about Lenovo products.

Recycling and environmental information
Lenovo encourages owners of information technology (IT) equipment to responsibly recycle their equipment
when it is no longer needed. Lenovo offers a variety of programs and services to assist equipment owners in
recycling their IT products. For information about recycling Lenovo products, go to:

Appendix D. Compliance and TCO Certified information

https://www.lenovo.com/recycling

The latest environmental information about our products is available at:
https://www.lenovo.com/ecodeclaration

Important battery recycling and WEEE information
Take back and recycling information for WEEE and batteries/accumulators in the European Union and the
United Kingdom

The crossed-out wheeled bin marking applies only to countries with WEEE and batteries waste regulations
including the European Union (EU), and United Kingdom (UK).
Appliances and batteries/accumulators are labeled in accordance with local regulations concerning waste
electrical and electronic equipment (WEEE) and waste batteries and waste accumulators. These regulations
determine the framework for the return and recycling of used appliances and used batteries/accumulators as
applicable within each geography. This label is applied to various products to indicate that the product is not
to be thrown away, but rather put in the established collection systems for reclaiming these end of life
products.
The label on the battery may also include a chemical symbol for the metal concerned in the battery (Pb for
lead, Hg for mercury, and Cd for cadmium).
Users of electrical and electronic equipment (EEE) and users of batteries/accumulators with the crossed-out
wheeled bin marking must not dispose of end of life products as unsorted municipal waste, but use the
collection framework available to them for the return, recycle, and recovery of WEEE and waste batteries/
accumulators and to minimize any potential effects of EEE and batteries on the environment and human
health due to the presence of hazardous substances.
Lenovo electrical and electronic equipment (EEE) may contain parts and components, which at end-of-life
might qualify as hazardous waste.
EEE and waste electrical and electronic equipment (WEEE) can be delivered free of charge to the place of
sale or any distributor that sells electrical and electronic equipment of the same nature and function as the
used EEE or WEEE.
Before placing electrical and electronic equipment (EEE) in the waste collection stream or in waste collection
facilities, the end user of equipment containing batteries and/or accumulators must remove those batteries
and accumulators for separate collection.
Dispose of lithium batteries and battery packs from Lenovo products:
A coin-cell type lithium battery might be installed inside your Lenovo product. You can find details about the
battery in the product documentation. If the battery needs to be replaced, contact your place of purchase or
contact Lenovo for service. If you need to dispose of a lithium battery, insulate it with vinyl tape, contact your
place of purchase or a waste-disposal operator, and follow their instructions.
Your Lenovo device might contain a lithium-ion battery pack or a nickel metal hydride battery pack. You can
find details on the battery pack in the product documentation. If you need to dispose of a battery pack,
insulate it with vinyl tape, contact Lenovo sales, service, or your place of purchase, or a waste-disposal
86

T495s and X395 User Guide

operator, and follow their instructions. You also can refer to the instructions provided in the user guide for
your product.
For proper collection and treatment, go to:
https://www.lenovo.com/environment

For additional WEEE information, go to:
https://www.lenovo.com/recycling

WEEE information for Hungary
Lenovo, as a producer, bears the cost incurred in connection with the fulfillment of Lenovo's obligations
under Hungary Law No. 197/2014 (VIII.1.) subsections (1)-(5) of section 12.

Japan recycling statements
Collect and recycle a disused Lenovo computer or monitor
If you are a company employee and need to dispose of a Lenovo computer or monitor that is the property of
the company, you must do so in accordance with the Law for Promotion of Effective Utilization of Resources.
Computers and monitors are categorized as industrial waste and should be properly disposed of by an
industrial waste disposal contractor certified by a local government. In accordance with the Law for
Promotion of Effective Utilization of Resources, Lenovo Japan provides, through its PC Collecting and
Recycling Services, for the collecting, reuse, and recycling of disused computers and monitors. For details,
visit the Lenovo Web site at:
https://www.lenovo.com/recycling/japan

Pursuant to the Law for Promotion of Effective Utilization of Resources, the collecting and recycling of homeused computers and monitors by the manufacturer was begun on October 1, 2003. This service is provided
free of charge for home-used computers sold after October 1, 2003. For details, go to:
https://www.lenovo.com/recycling/japan

Dispose of Lenovo computer components
Some Lenovo computer products sold in Japan may have components that contain heavy metals or other
environmental sensitive substances. To properly dispose of disused components, such as a printed circuit
board or drive, use the methods described above for collecting and recycling a disused computer or monitor.
Dispose of disused lithium batteries from Lenovo computers
A button-shaped lithium battery is installed inside your Lenovo computer to provide power to the computer
clock while the computer is off or disconnected from the main power source. If you need to replace it with a
new one, contact your place of purchase or contact Lenovo for service. If you need to dispose of a disused
lithium battery, insulate it with vinyl tape, contact your place of purchase or an industrial-waste-disposal
operator, and follow their instructions.
Disposal of a lithium battery must comply with local ordinances and regulations.
Dispose of a disused battery from Lenovo notebook computers
Your Lenovo notebook computer has a lithium ion battery or a nickel metal hydride battery. If you are a
company employee who uses a Lenovo notebook computer and need to dispose of a battery, contact the
proper person in Lenovo sales, service, or marketing, and follow that person's instructions. You also can
refer to the instructions at:
Appendix D. Compliance and TCO Certified information

https://www.lenovo.com/jp/ja/environment/recycle/battery/

If you use a Lenovo notebook computer at home and need to dispose of a battery, you must comply with
local ordinances and regulations. You also can refer to the instructions at:
https://www.lenovo.com/jp/ja/environment/recycle/battery/

Recycling information for Brazil
Declaracoes de Reciclagem no Brasil
Descarte de um Produto Lenovo Fora de Uso
Equipamentos eletricos e eletronicos nao devem ser descartados em lixo comum, mas enviados a pontos de
coleta, autorizados pelo fabricante do produto para que sejam encaminhados e processados por empresas
especializadas no manuseio de residuos industriais, devidamente certificadas pelos orgaos ambientais, de
acordo com a legislacao local.
A Lenovo possui um canal especifico para auxilia-lo no descarte desses produtos. Caso voce possua um
produto Lenovo em situacao de descarte, ligue para o nosso SAC ou encaminhe um e-mail para:
reciclar@lenovo.com, informando o modelo, numero de serie e cidade, a fim de enviarmos as instrucoes
para o correto descarte do seu produto Lenovo.

Battery recycling information for the European Union

Notice: This mark applies only to countries within the European Union (EU).
Batteries or packaging for batteries are labeled in accordance with European Directive 2006/66/EC
concerning batteries and accumulators and waste batteries and accumulators. The Directive determines the
framework for the return and recycling of used batteries and accumulators as applicable throughout the
European Union. This label is applied to various batteries to indicate that the battery is not to be thrown
away, but rather reclaimed upon end of life per this Directive.
In accordance with the European Directive 2006/66/EC, batteries and accumulators are labeled to indicate
that they are to be collected separately and recycled at end of life. The label on the battery may also include
a chemical symbol for the metal concerned in the battery (Pb for lead, Hg for mercury, and Cd for cadmium).
Users of batteries and accumulators must not dispose of batteries and accumulators as unsorted municipal
waste, but use the collection framework available to customers for the return, recycling, and treatment of
batteries and accumulators. Customer participation is important to minimize any potential effects of batteries
and accumulators on the environment and human health due to the potential presence of hazardous
substances.
Before placing electrical and electronic equipment (EEE) in the waste collection stream or in waste collection
facilities, the end user of equipment containing batteries and/or accumulators must remove those batteries
and accumulators for separate collection.

T495s and X395 User Guide

Dispose of lithium batteries and battery packs from Lenovo products
A coin-cell type lithium battery might be installed inside your Lenovo product. You can find details about the
battery in the product documentation. If the battery needs to be replaced, contact your place of purchase or
contact Lenovo for service. If you need to dispose of a lithium battery, insulate it with vinyl tape, contact your
place of purchase or a waste-disposal operator, and follow their instructions.
Dispose of battery packs from Lenovo products
Your Lenovo device might contain a lithium-ion battery pack or a nickel metal hydride battery pack. You can
find details on the battery pack in the product documentation. If you need to dispose of a battery pack,
insulate it with vinyl tape, contact Lenovo sales, service, or your place of purchase, or a waste-disposal
operator, and follow their instructions. You also can refer to the instructions provided in the user guide for
your product.
For proper collection and treatment, go to:
https://www.lenovo.com/environment

Recycling information for mainland China

Battery recycling information for Taiwan

Battery recycling information for the United States and Canada

Restriction of Hazardous Substances (RoHS) Directive of countries and
regions
The latest environmental information about Lenovo products is available at:

Appendix D. Compliance and TCO Certified information

https://www.lenovo.com/ecodeclaration

European Union (EU) / United Kingdom (UK) RoHS
This Lenovo product, with included parts (cables, cords, and so on) meets the requirements of EU Directive
2011/65/EU (as amended by Directive 2015/863/EU) and UK SI 2012 No. 3032 on the restriction of the use of
certain hazardous substances in electrical and electronic equipment ("RoHS recast" or "RoHS 2").
For more information about Lenovo worldwide compliance on RoHS, go to:
https://www.lenovo.com/rohs-communication

Turkish WEEE / RoHS

Ukraine RoHS

India RoHS
RoHS compliant as per E-Waste (Management) Rules.
Mainland China RoHS
The information in the following table is applicable to products manufactured on or after January 1, 2015 for
sale in the People's Republic of China.

T495s and X395 User Guide

Appendix D. Compliance and TCO Certified information

Taiwan RoHS

Electromagnetic emission notices
Federal Communications Commission (FCC) Supplier's Declaration of
Conformity
The following information refers to the following products:
* ThinkPad T495s, machine types: 20QJ and 20QK
* ThinkPad X395, machine types: 20NL and 20NM
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
* Reorient or relocate the receiving antenna.
* Increase the separation between the equipment and receiver.
* Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
* Consult an authorized dealer or service representative for help.

T495s and X395 User Guide

Lenovo is not responsible for any radio or television interference caused by using other than recommended
cables and connectors or by unauthorized changes or modifications to this equipment. Unauthorized
changes or modifications could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Responsible Party:
Lenovo (United States) Incorporated
7001 Development Drive
Morrisville, NC 27560
Email: FCC@lenovo.com

FCC ID and IC Certification information
You can find the FCC and IC Certification information through one of the following methods:
* Through an electronic-label screen (E-label screen) preinstalled on your computer. To view the E-label
screen, see "Regulatory labels" on page 95.
* On a physical label attached to the outside of your computer shipping carton.

Industry Canada compliance statement
CAN ICES-003(B)/NMB-003(B)

European Union / United Kingdom (UK) conformity
European Union (EU) / United Kingdom (UK) -- Electromagnetic Compatibility Compliance
This product is in conformity with the protection requirements of EU Council Directive 2014/30/EU on the
approximation of the laws of the Member States, as well as UK SI 2016 No. 1091 with amendments, relating
to the electromagnetic compatibility limits for Class B equipment. These Class B requirements are intended
to offer adequate protection to broadcast services within residential environments.
EU ErP (EcoDesign) Directive (2009/125/EC) - external power adapters (Regulation (EU) 2019/1782),
Ecodesign for Energy-Related Products Regulations 2010 - UK SI 2010 No. 2617 (Ext PSU), SI 2020 No.
485 (Ntwk Standby), SI 2014 No. 1290 as amended
Lenovo products are compliant with the EU EcoDesign (ErP) Directive and UK EcoDesign for Energy-related
Products Regulations. Refer to the following for details. For EU, refer to the system declaration https://
www.lenovo.com/us/en/compliance/eu-doc, and for UK refer to the system declaration https://
www.lenovo.com/us/en/compliance/uk-doc.

German Class B compliance statement
Hinweis zur Einhaltung der Klasse B zur elektromagnetischen Vertraglichkeit
Dieses Produkt entspricht den Schutzanforderungen der EU-Richtlinie zur elektromagnetischen
Vertraglichkeit Angleichung der Rechtsvorschriften uber die elektromagnetische Vertraglichkeit in den EUMitgliedsstaaten und halt die Grenzwerte der Klasse B der Norm gema Richtlinie.

Appendix D. Compliance and TCO Certified information

Um dieses sicherzustellen, sind die Gerate wie in den Handbuchern beschrieben zu installieren und zu
betreiben. Des Weiteren durfen auch nur von der Lenovo empfohlene Kabel angeschlossen werden. Lenovo
ubernimmt keine Verantwortung fur die Einhaltung der Schutzanforderungen, wenn das Produkt ohne
Zustimmung der Lenovo verandert bzw. wenn Erweiterungskomponenten von Fremdherstellern ohne
Empfehlung der Lenovo gesteckt/eingebaut werden.
Zulassungsbescheinigung laut dem Deutschen Gesetz uber die elektromagnetische Vertraglichkeit von
Betriebsmitteln, EMVG vom 20. Juli 2007 (fruher Gesetz uber die elektromagnetische Vertraglichkeit von
Geraten), bzw. der EU Richtlinie 2014/30/EU, der EU Richtlinie 2014/53/EU Artikel 3.1b), fur Gerate der
Klasse B.
Dieses Gerat ist berechtigt, in Ubereinstimmung mit dem Deutschen EMVG das EG-Konformitatszeichen CE - zu fuhren. Verantwortlich fur die Konformitatserklarung nach Paragraf 5 des EMVG ist die Lenovo
(Deutschland) GmbH, Meitnerstr. 9, D-70563 Stuttgart.

Japan VCCI Class B compliance statement

Japan compliance statement for products which connect to the power
mains with rated current less than or equal to 20 A per phase

Japan notice for ac power cord
The ac power cord shipped with your product can be used only for this specific product. Do not use the ac
power cord for other devices.

Other compliance and TCO Certified information of countries and
regions
This section provides other compliance information about Lenovo products.

Certification-related information
Product name
* ThinkPad T495s

Compliance ID

Machine type(s)

TP00105B

20QJ and 20QK

TP00106B

20NL and 20NM

* ThinkPad T495s LTE (for mainland China
only)
* ThinkPad X395
* ThinkPad X395 LTE (for mainland China
only)

T495s and X395 User Guide

The latest compliance information is available at:
https://www.lenovo.com/compliance

Regulatory labels
Depending on your country or region, you can find the government-required regulatory information through
one of the following methods:
* On a physical label attached to the outside of your computer shipping carton
* On a physical label attached to your computer
* Through an electronic-label screen (E-label screen) preinstalled on your computer
To access the E-label screen, restart the computer. When the logo screen is displayed, press F9, or tap the
prompt to enter the Startup Interrupt menu and the Regulatory Information option subsequently.
Korean E-label notice

TCO Certified
Selected models are TCO Certified and bear the TCO Certified logo.
Note: TCO Certified is an international third-party sustainability certification for IT products. For details, go
to https://www.lenovo.com/us/en/compliance/tco.

Export classification notice
This product is subject to the United States Export Administration Regulations (EAR) and has an Export
Classification Control Number (ECCN) of 5A992.c. It can be re-exported except to any of the embargoed
countries in the EAR E1 country list.

Lenovo product service information for Taiwan

Taiwan precautionary vision statement

* 3010
* 221

Supplemental information for the Eurasian Union

, 
 ,      (Wi-Fi,
Bluetooth  .).

, 23/  ,   979  ,
 ,  (Lenovo PC HK Limited, 23/F Lincoln House, Taikoo Place
979 King's Road, Quarry Bay, Hong Kong)

Appendix D. Compliance and TCO Certified information

( /) 143401,  , .
,  ,  4,  1,  VII, . +7
495 645 83 38,  +7 495 645 78 77.
,          
*   .

( 
)

*  2.601-2013    .
 ,  5.1,  5.1.2,  
  .
  *   ,   Date (  
 --).     
 -: https://support.lenovo.com

Brazil audio notice
Ouvir sons com mais de 85 decibeis por longos periodos pode provocar danos ao sistema auditivo.

ENERGY STAR model information

ENERGY STAR is a joint program of the U.S. Environmental Protection Agency and the U.S. Department of
Energy aimed at saving money and protecting the environment through energy efficient products and
practices.
Lenovo is proud to offer products with the ENERGY STAR certified designation. Lenovo computers, if carry
an ENERGY STAR mark, have been designed and tested to conform to the ENERGY STAR program
requirements for computers as prescribed by the U.S. Environmental Protection Agency. For a certified
computer, an ENERGY STAR mark may be affixed to the product, the product packaging, or displayed
electronically on the E-label screen or the power settings interface.
By using ENERGY STAR compliant products and taking advantage of the power management features of
your computer, you reduce the consumption of electricity. Reduced electrical consumption contributes to
potential financial savings, a cleaner environment, and the reduction of greenhouse gas emissions. For more
information about ENERGY STAR, go to https://www.energystar.gov.
Lenovo encourages you to make efficient use of energy an integral part of your day-to-day operations. To
help in this endeavor, Lenovo has preset a default power plan. To change the power plan, see "Set the power
plan" on page 28.

T495s and X395 User Guide

Appendix E. Notices and trademarks
Notices
Lenovo may not offer the products, services, or features discussed in this document in all countries. Consult
your local Lenovo representative for information on the products and services currently available in your
area. Any reference to a Lenovo product, program, or service is not intended to state or imply that only that
Lenovo product, program, or service may be used. Any functionally equivalent product, program, or service
that does not infringe any Lenovo intellectual property right may be used instead. However, it is the user's
responsibility to evaluate and verify the operation of any other product, program, or service.
Lenovo may have patents or pending patent programs covering subject matter described in this document.
The furnishing of this document does not give you any license to these patents. You can send license
inquiries, in writing, to:
Lenovo (United States), Inc.
8001 Development Drive
Morrisville, NC 27560
U.S.A.
Attention: Lenovo Director of Licensing
LENOVO PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS
OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT,
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some jurisdictions do not allow
disclaimer of express or implied warranties in certain transactions, therefore, this statement may not apply to
you.
Changes are made periodically to the information herein; these changes will be incorporated in new editions
of the publication. To provide better service, Lenovo reserves the right to improve and/or modify the
products and software programs described in the manuals included with your computer, and the content of
the manual, at any time without additional notice.
The software interface and function and hardware configuration described in the manuals included with your
computer might not match exactly the actual configuration of the computer that you purchase. For the
configuration of the product, refer to the related contract (if any) or product packing list, or consult the
distributor for the product sales. Lenovo may use or distribute any of the information you supply in any way it
believes appropriate without incurring any obligation to you.
The products described in this document are not intended for use in implantation or other life support
applications where malfunction may result in injury or death to persons. The information contained in this
document does not affect or change Lenovo product specifications or warranties. Nothing in this document
shall operate as an express or implied license or indemnity under the intellectual property rights of Lenovo or
third parties. All information contained in this document was obtained in specific environments and is
presented as an illustration. The result obtained in other operating environments may vary.
Lenovo may use or distribute any of the information you supply in any way it believes appropriate without
incurring any obligation to you.
Any references in this publication to non-Lenovo Web sites are provided for convenience only and do not in
any manner serve as an endorsement of those Web sites. The materials at those Web sites are not part of the
materials for this Lenovo product, and use of those Web sites is at your own risk.

Any performance data contained herein was determined in a controlled environment. Therefore, the result
obtained in other operating environments may vary significantly. Some measurements may have been made
on development-level systems and there is no guarantee that these measurements will be the same on
generally available systems. Furthermore, some measurements may have been estimated through
extrapolation. Actual results may vary. Users of this document should verify the applicable data for their
specific environment.
This document is copyrighted by Lenovo and is not covered by any open source license, including any Linux
agreement(s) which may accompany software included with this product. Lenovo may update this document
at any time without notice.
For the latest information or any questions or comments, contact or visit the Lenovo Web site:
https://support.lenovo.com

Trademarks
LENOVO, LENOVO logo, THINKPAD, THINKPAD logo, TRACKPOINT, and ULTRACONNECT are trademarks
of Lenovo. Microsoft, Windows, Direct3D, BitLocker, and Cortana are trademarks of the Microsoft group of
companies. Ubuntu is a registered trademark of Canonical Ltd. The terms HDMI and HDMI High-Definition
Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States
and other countries. Linux is the registered trademark of Linus Torvalds in the U.S. and other countries.
Ubuntu is a registered trademark of Canonical Ltd. "Fedora" is a registered trademark of Red Hat, Inc. Wi-Fi,
Wi-Fi Alliance, and Miracast are registered trademarks of Wi-Fi Alliance. DisplayPort is a trademark of the
Video Electronic Standards Association. USB-C is a trademark of USB Implementers Forum. All other
trademarks are the property of their respective owners. (c) 2020 Lenovo.

T495s and X395 User Guide

https://pcsupport.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-x-series-laptops/thinkpad-x395/document-userguide

Anonymous

User manual X395 Lenovo Thinkpad Lapotp30.03.25

Information Epoch 1782123739