Osmo Action4 4K Action Camera User Manual13.04.24

Home » DJi » dji Osmo Action4 4K Action Camera User Manual
Contents
1 dji Osmo Action4 4K Action
Camera
2 Using this Manual
3 Overview
4 Accessories
5 Using for the First Time
6 Operation
7 Camera View
8 Status LED Descriptions
9 Transferring Files
10 Microphone Connection
11 DJI Mimo App Home Screen
12 Maintenance
13 Specifications
14 Documents / Resources
14.1 References
15 Related Posts
dji Osmo Action4 4K Action Camera
dji Osmo Action4 4K Action Camera User Manual
Manuals+ — User Manuals Simplified.
This document is copyrighted by DJI with all rights reserved. Unless otherwise authorized by DJI, you are not
eligible to use or allow others to use the document or any part of the document by reproducing, transferring, or
selling the document. Users should only refer to this document and the content thereof as instructions to operate
DJI products. The document should not be used for other purposes.
Searching for Keywords
Search for keywords such as Battery or Install to find a topic. If you are using Adobe Acrobat Reader to read this
document, press Ctrl+F on Windows or Command+F on Mac to begin a search.
Navigating to a Topic
View a complete list of topics in the table of contents. Click on a topic to navigate to that section.
Printing this Document
This document supports high resolution printing.
Using this Manual
Legends
Important
Hints and Tips
Read Before Use
Read the following documents before using DJI™ OSMO™ Action 4.
1. Osmo Action 4 Safety Guidelines
2. Osmo Action 4 Quick Start Guide
3. Osmo Action 4 User Manual
It is recommended to watch all tutorial videos and read the safety guidelines before using for the first time. Make
sure to review the Quick Start Guide before using for the first time and refer to this User Manual for more
information.
Download DJI Mimo App and Watch the Tutorial Video
Scan the QR code to download the DJI Mimo App and watch the tutorial videos.
https://s.dji.com/guide60.
Product Profile
Osmo Action 4 is capable of capturing smooth video at up to 4K/120fps and offers a 155° super-wide FOV. With
DJI’s latest EIS (Electronic Image Stabilization) technology, Osmo Action 4 can record super smooth footage for
various sports scenes. With a 1/1.3-inch image sensor, the camera ensures low-noise footage in sports scenarios
and low-light scenes with a high dynamic range or high contrast. In addition, D-Log M color mode provides a
more comfortable color perception and a larger dynamic range, which is convenient for post-production color
correction. Osmo Action 4 is equipped with dual touchscreens. The front touchscreen helps capture the perfect
selfie, while the rear touchscreen displays the liveview of the camera. Both touchscreens enable users to change
the settings with fingertip movements. The buttons on the camera enable users to control recording or switch the
shooting mode. Osmo Action 4 is waterproof at depths of up to 18 m. With different Osmo accessories, users can
enjoy the full range of Osmo Action 4 features.
Overview
1. Shutter/Record Button
2. Front Touchscreen
3. Lens
4. Status LED I
5. Microphone I
6. Color Temperature Photo Sensor
7. Microphone II
8. USB-C Port
9. USB-C Port Cover
10. USB-C Port Cover Release Button
11. Lens Protective Cover
12. Quick Switch Button
13. Speaker
14. Status LED II
15. Rear Touchscreen
16. Battery Compartment Cover
17. microSD Card Slot
18. Battery Compartment Cover Release Button
19. Windproof Microphone
20. Quick-Release Slot I
21. Quick-Release Slot II
Accessories
Osmo Action 4 is compatible with various accessories to flexibly change the position to shoot various sports
scenes.
Osmo Action Curved Adhesive Base Kit
The Osmo Action Curved Adhesive Base Kit includes the following accessories.
Accessory Description
Osmo Action Quick-Release Adapter Mount: with a magnetic design, the qui
ck-release adapter mount can be easily attached to the camera and connect
ed to other accessories.
Osmo Locking Screw: secures the Osmo Action Quick-Release Adapter Mo
unt to the Osmo Action Curved Adhesive Base.
Osmo Action Curved Adhesive Base: the base forms a strong, durable, and
long-lasting bond on clean and curved surfaces, ensuring secure mounting.
Press down on the camera until the clips of the quick-release adapter mount are firmly inserted into the quick-
release slots on the camera, and then tighten the locking screws. Wipe the surface of the object before attaching
the adhesive base. Attach and press the adhesive base down firmly, and hold for at least 10 seconds. It is
recommended to wait 30 minutes before attaching the camera.
Press down on the camera until the clips of the quick-release adapter mount are firmly inserted into the quick-
release slots on the camera, and then tighten the locking screws. Press both clips of the quick-release adapter
mount when removing the camera.
Osmo Action Curved Adhesive Base can only be applied to clean curved surfaces once. DO NOT attach the
curved adhesive base to surfaces that are flat, rough, powdered, peeling, covered in dust or sand, or have oil,
wax, or water stains. Otherwise, the adapter mount may not be attached firmly.
The recommended application temperature for the base is -10° to 40° C (14° to 104° F). DO NOT attach the
adhesive base to a surface with a higher or lower temperature.
Osmo Action Horizontal-Vertical Protective Frame
With the Osmo Action Horizontal-Vertical Protective Frame, users can flip the camera from the horizontal to the
vertical position for different shooting angles. As shown in the figure below, open the buckle of the horizontal-
vertical protective frame, align and place the camera into the frame, and then close the buckle. The left side of the
frame is equipped with two quick-release slots, which can be used with the Osmo Action Quick-Release Adapter
Mount to fasten other accessories such as the Osmo Action Curved Adhesive Base Kit and the Osmo 1.5m
Extension Rod.
Osmo Action Extreme Battery
The Osmo Action Extreme Battery boosts Osmo Action 4 performance across a wide temperature range from -20°
to 45° C (4° F to 113° F). With a 1770 mAh capacity, the battery can continuously work for up to 160 minutes.*
Refer to Battery Usage Notes for more detailed information on battery usage. Tested at room temperature
(25°C/77°F) and 1080p/24fps (16:9), with RockSteady on, Wi-Fi off, and screen off. This data is for reference
only.
Osmo Action Multifunctional Battery Case
The Osmo Action Multifunctional Battery Case (hereinafter referred to as the battery case) is designed for storing
two microSD cards and three Osmo Action Extreme Batteries safely. Users can check the battery levels by
pressing the button once or opening the battery case. The status LEDs will display the battery level. When a
charger is connected to the battery case with batteries inserted, the battery case will charge the batteries. When
the batteries are inserted into the battery case, with external devices connected to the USB-C port, the batteries
can be used as a power bank to charge the connected external devices. The batteries with the highest power
level will be charged first, followed by the remaining batteries to be charged in sequence. The batteries with the
lowest power level will be discharged first, followed by the remaining batteries to be discharged in sequence.
When using the battery case to charge the Osmo Action Extreme Battery, it is recommended to use the DJI 30 W
USB-C Charger (not included as standard) or a USB-C charger that supports Power Delivery or PPS
(Programmable Power Supply). Three batteries can be fully charged in about two hours with the DJI 30 W USB-C
Charger.
DO NOT use the battery case to charge non-DJI OSMO batteries. DJI OSMO shall not be responsible for any
fault or damage caused by the use of any non-DJI OSMO battery.
Place the battery case on a flat and stable surface when in use. Make sure the device is properly insulated to
prevent fire hazards.
DO NOT attempt to touch the metal terminals on the battery ports.
Clean the metal terminals with a clean, dry cloth if there is any noticeable buildup.
The battery case is not waterproof. DO NOT place it in water or spill any liquid on the case.
Using for the First Time
Attaching the Battery
Press the release button on the battery compartment cover and slide upward, then insert the battery into the
battery compartment, as shown below. Make sure the battery is properly inserted, then close the battery
compartment cover. Note: if the battery cover is properly mounted, the red marks on the bottom will not be visible.
Inserting the microSD Card
The footage shot on Osmo Action 4 is stored on a microSD card. A UHS-I Speed Grade 3 rating microSD card is
required due to the fast reading and writing speeds necessary for highresolution video data. Refer to the
recommended microSD card list in Specifications for more information. Insert the microSD card into the microSD
card slot as shown.
Gently push the microSD card into the camera to partially eject the microSD card
Charging Osmo Action 4
Press the release button on the USB-C port cover and slide the cover down.
Connect a USB-C charger (not included) to the USB-C port using the Type-C to Type-C PD cable (included). It
is recommended to use the DJI 30 W USB-C Charger or a USB-C charger that supports Power Delivery or
PPS (Programmable Power Supply). When the status LEDs turn off, the battery is fully charged. It takes about
18 minutes to charge the battery to 80%. The battery can be fully charged in about 49 minutes.*
Charging time was tested using a DJI 30 W USB-C Charger in a 25° C (77° F) environment. For reference
only.
Activating Osmo Action 4
The DJI Mimo app is required for activation when using Osmo Action 4 for the first time. Follow the steps below to
activate.
1. Press and hold the Quick Switch Button to power on.
2. Enable Wi-Fi and Bluetooth on the mobile device.
3. Launch DJI Mimo, tap , and follow the instructions to activate Osmo Action 4.
Refer to the relevant sections in DJI Mimo App for more information on how to operate the app.
Operation
Button Features
Shutter/Record Button
Press once: take a photo or start/stop recording.
Press and hold when powered off: power on quickly and begin shooting. The shooting mode will depend on the
SnapShot settings. After shooting, the camera will automatically power off if left idle for three seconds.
Quick Switch Button
Press and hold: power on/off.
Press once: switch between shooting modes.
Operating the Touchscreen
After the camera is powered on, both touchscreens of the camera display the liveview as well as the shooting
mode, battery level, and microSD card information. Tap or swipe on a touchscreen to interact with the camera.
Note: the two touchscreens cannot be operated at the same time. When one touchscreen is operated, the other
touchscreen is locked.
Operating the Touchscreen Descriptions
Tap
Select the icons on both sides of the screen to playback shot
footage and change the camera settings.
Swipe Down from the top of the Screen
Enters the control menu.
Swipe Left or Right
Switches between video, photo, and other shooting modes.
Swipe Up from the Bottom of the Screen
Sets the shooting parameters such as Aspect Ratio, Countdown Tim
er, and Resolution.
Camera View
1. Storage Capacity Information
20m22s : the icon displays either the storage capacity, the remaining number of photos or the video
duration that can be taken or recorded according to the current shooting mode. The icon is displayed only
when a microSD card is inserted.
2. Playback
: tap to preview the last photo or video captured or played back. Swipe from the right to exit playback and
go back to liveview.
3. Shooting Modes
: tap the icon and swipe to select the shooting mode.
Shooting Modes Description
Take a photo Take a photo or countdown photo.
Video Record a video.
Slow Motion
Supports 4x or 8x slow-motion video shooting. In Slow Motion mode, the camera record
s the video with a high frame rate and slows the footage down to 4x or 8x the normal sp
eed during playback. Slow Motion catches details not visible to the naked eye, which is i
deal for fast-action shots. Note: slow-motion videos do not include audio. The audio file i
s stored as a standalone file and has the same path as the videos, which can be transfer
red to your computer.
Timelapse
Select from Hyperlapse and Timelapse. In this mode, the camera turns long events into
short videos by taking a frame of video at set intervals.
Use Hyperlapse to record smooth timelapse videos when the camera is in motion (such
as in a car or when held in the hand). Use Timelapse to record timelapse videos when t
he camera is mounted and still.
Three presets in Timelapse are designed for typical scenes such as Crowds, Clouds, an
d Sunset. Users can also optimize the interval and duration for recording timelapse vide
os.
4. Battery Level
: this icon displays the current battery level of Osmo Action 4. Tap the icon to view more detailed
information about the battery level.
5. Parameters
: click to adjust the image and audio parameters. Tap PRO to adjust pro parameters. Various parameters
can be set in different shooting modes.
Shooting Modes Parameters
Photo
Basic Mode
The FOV can be adjusted.
FOV: the FOV can be set to Standard (Dewarp) or Wide.
PRO Mode
Exposure, White Balance, FOV, and Format are available.
1. Exposure: Auto and Manual modes are available.
2. White Balance: Auto and Manual modes are available.
3. FOV: the parameters are same with Basic Mode.
4. Format: select the picture to be stored as JPEG or JPEG+RAW.
Video
Basic Mode
FOV, Image Adjustment, EIS Priority in Low Light, and Low-Light Image Enhancement are ava
ilable.
1. FOV: FOV can be set to Narrow, Standard (Dewarp), Wide, or Ultra Wide. Some FOV
options are unavailable when using certain frame rates.
2. EIS Priority in Low Light: enabling EIS Priority in Low Light will remove motion blur and dis
able anti-flicker function. Image sharpness may be affected when ambient light is too low.
3. Image Adjustment: users can adjust the sharpness and noise reduction based on needs f
or optimal image quality.
4. Low-Light Image Enhancement: when enabled, the camera will detect low-light environme
nt automatically and adjust exposure parameters intelligently to improve image quality.
PRO Mode
Image and audio parameters can be adjusted.
Image Parameters: Exposure, White Balance, Color, FOV, Image Adjustment, and Low-Light I
mage Enhancement are available.
• Exposure: Auto and Manual modes are available.
• White Balance: Auto and Manual modes are available.
• Colors: Normal and D-Log M are available. D-Log M is designed for professional color gra
ding in post-editing. In high-contrast or multi- color (e.g., garden, field, etc.) scenarios, it can en
large the dynamic range for more color-tuning space in post-production. 10-bit color depth ena
bles smoother color transition.
• FOV: the parameters are same with Basic Mode.
• Image Adjustment: the parameters are same with Basic Mode.
• Low-Light Image Enhancement: the parameters are same with Basic Mode.
Audio Parameters: Channel, Wind Noise Reduction, and Gain are available.
• Channel: select from Stereo or Mono.
• Wind Noise Reduction: when enabled, the camera will reduce the wind noise picked up by
the built-in microphone using algorithms. Note: Wind Noise Reduction does not work when con
nected to the external microphone.
• When a microphone is connected, the input gain of the microphone can be adjusted.
Slow Motion
Basic Mode
The FOV and image parameters can be adjusted.
1. FOV: FOV can be set to Standard (Dewarp) or Wide.
2. Image Adjustment: users can adjust the sharpness and noise reduction based on nee
ds for optimal image quality.
PRO Mode
Exposure, White Balance, Color, FOV, and Image Adjustment are available.
1. Exposure Exposure: Auto and Manual modes are available.
2. White Balance: Auto and Manual modes are available.
3. Colors: Normal and D-Log M are available. D-Log M is designed for professional color
grading when post-editing. In high-contrast or multi-color (e.g., garden, field, etc.) scenario
s, it can enlarge the dynamic range for more color-tuning in post-production. 10-bit color d
epth enables smoother color transition.
4. FOV: the parameters are same with Basic Mode.
5. Image Adjustment: the parameters are same with Basic Mode.
Timelapse
Hyperlapse
Basic Mode: FOV, EIS Priority in Low Light, and Image Adjustment are available.
PRO Mode: Exposure, White Balance, Color, FOV, and Image Adjustment are available.
Timelapse
Basic Mode: FOV and Image Adjustment are available.
PRO Mode: Exposure, White Balance, FOV, and Format are available.
Zoom
press and hold the icon, then drag to set the zoom ratio.
Swipe Down – Control Menu
Swipe down from the edge of the screen to enter the control menu.
1. Custom Mode
Tap and tap to save the current configuration as a custom mode. Save the shooting parameters in the
custom mode, which can then be used directly to shoot similar scenes. Users can save up to five custom
modes.
2. Quick Switch
Set the modes accessible with the Quick Switch Button: Screen Switch, Custom Modes, Photo, Video, Slow
Motion, Timelapse, Hyperlapse, and Playback. When Voice Prompt is enabled, the camera will voice broadcast
the shooting mode once the quick switch button is pressed to change the mode. When the camera is installed
on a helmet or other hard-to-see locations, users can accurately select the required mode with Voice Prompt.
3. Brightness
Tap and move the slider to adjust the brightness.
4. Settings

Orientation Lock
Tap to switch between automatic orientation and locked orientation.
Screen Lock
Tap to lock the screen. Swipe up on the touchscreen to unlock the screen.
Voice Control
Tap to enable Voice Control so the user can control the camera with set voice commands. Voice Control is
useful in the sports scenarios where hands are busy such as when cycling or skiing.
Full Front Screen
Tap to enable or disable full screen display on the front screen.
Swipe Up – Parameters Settings
Swipe up from the bottom of the screen to set the parameters for each shooting mode.
Status LED Descriptions
Osmo Action 4 has two status LEDs which indicate the same status information. They can be turned on and off.
Blinking Pattern Description
Solid green Ready to use
Temporarily off Taking a photo
Blinks green Osmo Action 4 is charging when powered off
Blinks red and green alter
nately Updating firmware
Blinks red slowly Recording a video or taking a countdown photo
Blinks red three times rapi
dly Powers off the camera or powers on the camera at low battery level
Off MicroSD card abnormality (no microSD card detected, microSD card storage is full
, or microSD card error.)
Storing Photos and Videos
The footage shot on Osmo Action 4 can only be stored on a microSD card (not included). A UHS-I Speed Grade 3
rating microSD card is required due to the fast read and write speeds necessary for high-resolution video data.
The photos and videos can be transferred to a mobile device or computer. Refer to Transferring Files for detailed
information.
Transferring Files
Transferring Files to a Phone
Connect Osmo Action 4 to DJI Mimo, tap the Playback icon to preview photos and videos. Click to
download photos and videos. The photos and videos can be shared directly from DJI Mimo to social media
platforms.
Transferring Files to a Computer
Power on Osmo Action 4 and connect it to a computer using a USB-C cable. When connected to a computer, a
pop-up will appear, this prompts the user to select the USB connection type on the camera touchscreen. Tap
Transfer File to download the files from the camera to the computer. When transferring a file, the camera cannot
take photos or record videos. Select Cancel to only charge Osmo Action 4.
Reconnect Osmo Action 4 to the computer if a file transfer is interrupted.
OTG Connection for Transferring Files
For the Android devices supporting OTG connection, the files can be transferred from the camera to the Android
device with OTG connection. Connect the camera to an Android device with the Type-C to Type-C PD cable
(included) using the USB-C port on the camera. When connected, view and transfer the photos and videos of the
camera via the device album or file management. If the camera cannot automatically recognize the Android device
using the OTG connection, swipe down from the edge of the screen and enter the control menu. Tap Settings >
OTG Connection, and use the Type-C to Type-C PD cable to connect the camera to device.
Webcam Mode
Osmo Action 4 can work as a webcam on a computer. Power on the camera and connect it to the computer using
a USB-C cable. The camera will go into USB mode. Tap Webcam to enter the Webcam mode, and the camera will
function as a webcam input device. The bottom of the screen displays Webcam. Press the shutter/record button to
start recording. Tap the Image Parameter Settings icon on the right side of the screen to set the exposure, white
balance, and FOV parameters. Users can preview recorded videos after exiting the Webcam mode.
Microphone Connection
Osmo Action 4 can be linked to an external microphone, including DJI Mic or any third-party digital USB-C
microphones that support 48K/16bit.
Follow the steps below (with DJI Mic as an example) to connect to a microphone:
1. Press the release button on the USB-C port cover and slide it downward. Lift the cover upward until it is
detached from the device.
2. Power on the receiver and transmitter, and make sure the receiver and transmitter are linked.
3. Attach the receiver to the USB-C port of the camera using the USB-C adapter. A microphone icon will be
displayed on the screen.
4. Press the linking button on the transmitter to start recording while using the transmitter for audio. Press the
linking button again to stop recording.
The transmitter and the receiver are linked by default. Follow the steps below to link if the transmitter and
receiver are disconnected.
Place the transmitter and the receiver in the charging case to link automatically.
Power on the transmitter and the receiver, press and hold the link button on the transmitter, slide down on the
screen of the receiver, select Settings and scroll through and tap Link Device to start linking. The status LED
glows solid green to indicate linking was successful.
DJI Mimo App
When used with the DJI Mimo app, users can monitor the current camera view, set the camera parameters, and
control the camera with a mobile device. The DJI Mimo app enables user to get most out of Osmo Action 4 with a
series of functions, such as transferring files, editing and sharing, InvisiStick for Skiing, and Wi-Fi livestream.
Download the DJI Mimo App
Search DJI Mimo in the app store, or scan the QR code to download and install.
https://s.dji.com/guide60.
Connecting to the DJI Mimo App
1. Power on Osmo Action 4.
2. Enable Wi-Fi and Bluetooth on the mobile device.
3. Launch DJI Mimo, tap , and follow the instructions to activate Osmo Action 4.
If there is a problem when connecting to DJI Mimo, follow the steps below.
Make sure that both Wi-Fi and Bluetooth are enabled on the mobile device.
Make sure the DJI Mimo app has the latest firmware version.
Swipe down from the top of the screen to enter the control menu, select Wireless Connection > Reset
Connection. The camera will reset all connections and Wi-Fi passwords.
DJI Mimo App Home Screen
Lauch DJI Mimo and enter the home screen.
Device: tap to connect to Osmo Action 4. Once connected, DJI Mimo enters the camera view.
Academy: tap to watch tutorials and view manuals.
AI Editor: provides several templates for editing photos or videos.
Home: tap to return to the home screen.
Album: manage and view footage from a mobile device or DJI device.
Editor: tap to edit photos or videos on Osmo Action 4 or import them to and edit on a mobile device.
Profile: register or log in to a DJI account. View works and settings, check likes and followers, send
messages to other users, or connect with the DJI Store.
Camera View
The camera view display may differ depending on the shooting mode. This display is for reference only.
1. Home
: tap to return to the home screen.
2. Wi-Fi
: displays Wi-Fi connection.
3. Battery Level
: displays the current battery level of Osmo Action 4.
4. microSD Card Information
: displays either the remaining number of photos that can be taken or the video duration that
can be recorded according to the current shooting mode.
5. Custom Mode
: tap and tap to save the current configuration as a custom mode. Save the shooting parameters
in the custom mode, which can then be used directly to shoot similar scenes. Users can save up to five custom
modes.
6. Shutter/Record Button
: tap to take a photo or to start or stop recording a video.
7. Shooting Modes
Scroll to select the shooting mode.
8. Playback
: tap to preview photos and videos as soon as they are captured.
9. Settings
: set the selected shooting mode as Basic or Pro mode. More settings become available once Pro is enabled,
including FOV, Format, Exposure and White Balance. Various parameters can be set when using different
shooting modes.
10. Shooting Parameters
: displays the parameters of the current shooting mode. Tap to set the parameters.
11. Zoom
: displays the current zoom ratio. Place two fingers on the screen and move them apart to zoom in or
pinch together to zoom out.
Maintenance
Firmware Update
The firmware version of Osmo Action 4 is updated using DJI Mimo. Make sure the battery level of Osmo Action 4
is at least 15% before updating its firmware version. Connect Osmo Action 4 to the DJI Mimo app. If new firmware
is available, users will be notified by DJI Mimo. Update the firmware according to the on-screen instructions. The
update takes approximately 2 minutes.
Underwater Usage Notes
Osmo Action 4 can be used underwater at depths of up to 18 m. When used with the Osmo Action 60m
waterproof case, the device can operate underwater up to 60 m deep. Observe the following precautions when
using the device in water.
1. Make sure the battery and battery compartment are dry and clean before inserting the battery. Otherwise, it
may affect the battery contact and waterproofing ability. Make sure the battery compartment cover is firmly
fastened after the battery is inserted. Note: if the cover is properly mounted, the red marks on the bottom will
not be visible.
2. Make sure the USB-C port cover is clean and closed before using. Otherwise, it will affect the device
waterproofing ability.
3. Make sure the lens protective cover is clean and closed before using. Otherwise, it will affect the device
waterproofing ability. Make sure the lens protective cover and lens are dry and clean. Sharp or hard objects
may damage the lens and affect the ability of the device. Make sure the lens protective cover are firmly
mounted and fastened.
4. Osmo Action 4 is not waterproof unless the battery compartment cover, USB-C port cover, and lens protective
cover are firmly mounted and fastened. The camera is NOT waterproof when used with Osmo Action Lens
Hood.
5. Avoid jumping into water at high speed with Osmo Action 4. Otherwise, the impact may result in water
seepage. Make sure the camera is waterproofed before jumping into water.
6. DO NOT use Osmo Action 4 in hot springs or extreme underwater environments. DO NOT let Osmo Action 4 to
come into contact with corrosive or unknown liquids.
7. Rinse the camera with clean water after using it underwater. Allow it to dry naturally before using again. DO
NOT dry the camera with hot air using a hair dryer, otherwise the microphone membrane and the built-in
breathable membrane will rupture, and the camera will no longer be waterproof.
Attach the waterproof case to Osmo Action 4 when using it while diving, surfing, underwater for an extended
period, or in other situations involving high water impact. Observe the following precautions when using the device
with the waterproof case:
1. Make sure the rubber seal is clean and firmly attached during use.
2. Make sure the waterproof case is dry (for best results, place anti-fog fiber in the case during use) and the latch
is secure.
3. Before use, it is recommended to place the waterproof case underwater for approximately 5 minutes to ensure
it is working properly.
4. Rinse the case with tap water to prevent corrosion after using it in the sea.
The touchscreens of Osmo Action 4 can be operated when their surface is wet.
The touchscreens cannot function underwater. Users can press the camera buttons to start recording.
Shutter/record button is disabled automatically when the camera is used without Osmo Action waterproof case
at a depth of more than 14 m.
Cleaning Notes
1. Clean the lens protective cover with water or a lens cleaning pen, lens air blower, or lens cleaning cloth. When
changing the lens protective cover, make sure the camera is dry. After using Osmo Action 4 in water, let the
camera dry before using it again. This will prevent water from seeping into the lens protective cover and
fogging up the lens. DO NOT remove the lens protective cover frequently to avoid dust accumulating inside the
lens cover, which can affect shooting quality.
2. Clean the lens with a lens cleaning pen, lens air blower, or lens cleaning cloth.
3. Clean the battery and battery compartment with a clean, dry cloth. Make sure the quick-release slots on the
camera are clean from dust and sand when attaching the Quick-Release Adapter Mount.
Battery Usage Notes
1. DO NOT use non-DJI OSMO batteries. New batteries can be purchased at www.dji.com. DJI OSMO shall not
be responsible for any fault or damage caused by the use of any non-DJI OSMO batteries.
2. The battery should be used at temperatures between -20° to 45° C (-4° to 113° F ). Use of the battery at
temperatures above 45° C (113° F) can lead to a fire or explosion. Before using the battery in a low-
temperature environment, it is recommended to charge the battery fully in a normal temperature environment.
Charging the battery at the ideal temperature can prolong battery life.
3. Battery performance will be affected if the battery is not used for an extended period.
4. Discharge and charge the battery completely once every three months to keep it in good working condition.
5. Remove the battery from Osmo Action 4 and store the battery in the Osmo Action Multifunctional Battery Case
when stored for an extended period.
Using Other Accessories (Not Included)
Accessory Diagram
Osmo 1.5m Extension Rod
1. Adjust the telescopic length of the extension rod appropriately when in use.
2. DO NOT drop or strike the extension rod in any way when in use to avoid damage.
3. DO NOT shake the extension rod violently when installed with the camera to avoid damage.
4. Rinse with clean water to remove sand after underwater usage.
5. DO NOT use the extension rod during thunderstorms to avoid lightning strikes.
Osmo Magnetic Ball-Joint Adapter Mount
Osmo Action 60m Waterproof Case
DJI Floating Handle
Osmo Action Suction Cup Mount
Osmo Action Helmet Chin Mount
Osmo Action Chest Strap Mount
Osmo Action Handlebar Mount
Osmo Action GPS Bluetooth Remote Controller
Support for DJI devices will be updated continuously. Visit https://www.dji.com/osmo-action-4 for a complete
list.
Specifications
General
Dimensions: 70.5×44.2×32.8 mm (L×W×H)
Weight: 145 g
Waterproof: 18 m [1] without the Waterproof Case, 60 m with the Waterproof Case
Number of Microphones: 3
Touchscreens: Front Screen: 1.4-inch 323 ppi 320×320 Rear Screen: 2.25-inch 326 ppi 360×640 Front/Rear
Screen Brightness: 750±50 cd/m²
Supported SD Cards: microSD (up to 512 GB)
Recommended microSD Cards Recommended models:
SanDisk Extreme Pro 32GB V30 A2 UHS-I Speed Grade 3
Kingston Canvas Go!Plus 64GB UHS-I Speed Grade 3
Kingston Canvas Go!Plus 128GB UHS-I Speed Grade 3
Kingston Canvas React Plus 64GB UHS-II Speed Grade 3
Kingston Canvas React Plus 128GB UHS-II Speed Grade 3
Kingston Canvas React Plus 256GB UHS-II Speed Grade 3
Lexar Pro 256GB SDXC UHS-I V30 R160/W120 (1066x)
Lexar Pro 512GB SDXC UHS-I V30 R160/W120 (1066x)
Camera
Sensor: 1/1.3-inch CMOS
Lens FOV: 155°
Aperture: f/2.8
Focus Range: 0.4 m to ∞
ISO Range Photo: 100-12800
Video: 100-12800
Electronic Shutter Speed Photo: 1/8000-30 s
Video: 1/8000 s to the limit of frames per second
Max Photo Resolution: 3648×2736
Zoom Digital Zoom
Photo: 4×
Video: Max 2×
Slow Motion/Timelapse: not available
Still Photography Modes Single: Approx. 10 MP
Countdown: Off/0.5/1/2/3/5/10 s
Standard Recording 4K (4:3): 3840×2880@24/25/30/48/50/60fps
4K (16:9): 3840×2160@100/120fps
4K (16:9): 3840×2160@24/25/30/48/50/60fps
2.7K (4:3): 2688×2016@24/25/30/48/50/60fps
2.7K (16:9): 2688×1512@100/120fps
2.7K (16:9): 2688×1512@24/25/30/48/50/60fps
1080p (16:9): 1920×1080@100/120/200/240fps
1080p (16:9): 1920×1080@24/25/30/48/50/60fps
Slow Motion 4K: 4× (120fps)
2.7K: 4× (120fps)
1080p: 8× (240fps), 4× (120fps)
Hyperlapse 4K/2.7K/1080p: Auto/×2/×5/×10/×15/×30
Timelapse 4K/2.7K/1080p@30fps
Intervals: 0.5/1/2/3/4/5/6/8/10/15/20/25/30/40 s
Duration: 5/10/20/30 mins, 1/2/3/5 hours, ∞
Stabilization EIS[2]:
RockSteady 3.0
RockSteady 3.0+
HorizonBalancing
HorizonSteady
Max Video Bitrate 130 Mbps
Supported File System exFAT
Photo Format JPEG/RAW
Video Format MP4 (H.264/HEVC)
Built-in Storage Capacity The camera does not have built-in storage, but storage
capacity can be expanded by inserting a microSD card.
Audio Output 48 kHz 16-bit; AAC:
RockSteady 3.0
RockSteady 3.0+
HorizonBalancing
HorizonSteady
Max Video Bitrate 130 Mbps
Supported File System exFAT
Photo Format JPEG/RAW
Video Format MP4 (H.264/HEVC)
Built-in Storage Capacity The camera does not have built-in storage, but storage
capacity can be expanded by inserting a microSD card.
Audio Output 48 kHz 16-bit; AAC
Battery
Type: LiPo 1S
Capacity: 1770 mAh
Energy: 6.8 Wh
Voltage: 3.85 V
Operating Temperature: -20° to 45° C (-4° to 113° F)
Charging Temperature: 5° to 40° C (41° to 104° F)
Operating Time: 160 minutes[3]
Connection
Wi-Fi Operating Frequency: 2.4000-2.4835 GHz 5.150-5.250 GHz 5.725-5.850 GHz
Wi-Fi Protocol: 802.11 a/b/g/n/ac
Wi-Fi Transmitter Power (EIRP): 2.4 GHz: < 15 dBm (FCC/CE/SRRC/MIC) 5.1 GHz: < 16 dBm
(FCC/CE/SRRC/MIC) 5.8 GHz: < 14 dBm (FCC/CE/SRRC)
Bluetooth Operating Frequency: 2.400-2.4835 GHz
Bluetooth Transmit Power (EIRP): <3 dBm
Bluetooth Protocol: BLE 5.0
1. Before use, close the battery compartment cover and the USB-C port cover, and tighten the Lens Protective
Cover. It is recommended to install the Waterproof Case for long-duration underwater shooting or in
environments with high water impact pressure. Osmo Action 4 and its Waterproof Case have an IP68
waterproof rating. Do not use the camera in hot springs or extreme underwater environments, or let it come
into contact with corrosive or unknown liquids.
2. EIS is not supported in Slow Motion and Timelapse modes. HorizonSteady is only available when the video
resolution is 1080p (16:9) or 2.7K (16:9) with a frame rate of 60fps or below. HorizonBalancing is only available
when the video resolution is 1080p (16:9), 2.7K (16:9), or 4K (16:9) with a frame rate of 60 fps or below.
3. Tested at room temperature (25°C/77°F) and 1080p/24fps (16:9), with RockSteady on, Wi-Fi off, and screen
off. This data is for reference only.
WE ARE HERE FOR YOU
Contact DJI SUPPORT
This content is subject to change
https://www.dji.com/osmo-action-4/downloads.
If you have any questions about this document, please contact DJI by sending a message to
DocSupport@dji.com.
DJI and OSMO are trademarks of DJI.
Copyright © 2023 DJI OSMO All Rights Reserved.
Documents / Resources
dji Osmo Action4 4K Action Camera [pdf] User Manual
964CPOS269, Osmo Action4 4K Action Camera, 4K Action Camera, Action Camera, Camera
References
DJI - Official Website
s.dji.com/guide60
DJI Osmo Action 4 - Set the Tone - DJI
DJI Osmo Action 4 - Downloads - DJI
Manuals+,

https://dl.djicdn.com/downloads/DJI_Osmo_Action_4/QSG/DJI_Osmo_Action_4_Quick_Start_Guide_v1.0_(Adventure_Combo).pdf

Anonymous

Osmo Action4 4K Action Camera User Manual13.04.24

Information Epoch 1732374348